Subscribe: AeroAlaska ~ Aviation Classifieds
Preview: AeroAlaska ~ Aviation Classifieds

AeroAlaska ~ Aviation Classifieds

Dedicated resource for the buyers and sellers of new and used aircraft, parts, services and other aviation items


Aeronca 15AC Sedan

Wed, 22 Nov 2017 19:22:56 -0900


3390 AFTT350 SMOH145 hpRecentspar AD inspectionShoulder harnessesWhelen tip strobesCleveland wheels with double puck brakes8.50x6 tiresMonanhan aluminum tanksAuto fuel STCSlick magsB&C starter1344 lbs empty705 lbs useful loadNorthland 2500 skisWing coversAll specifications subject to verification.

2007 Cubcrafters Sport Cub ELSA. CC11-100

Wed, 25 Oct 2017 18:20:17 -0900


•210 hrs TTAE•160 hrs on Sensenich ground adjustable prop with 3 pitch cartridges.•Last condition inspection (“annual”) July 2017•890 lbs Empty weight on 26” tires•Gross weight 1320 lbs•VGs•Rear stick cover•Headset hanger•Inertia reel shoulder harnesses•Continental O-200 with new rings, valves, and High compression pistons 160 hours ago•4-into-none exhaust•22 gals fuel•26” Airstreak tires and Scot ...

Experimental “PA-18-160” with Aerocet 2200 floats, 31” Tires and Straight Skis

Fri, 18 Aug 2017 14:27:31 -0900


-Immaculately cared for-This Aircraft is essentially a Piper Super Cub with a Home-built/experimental data tag. It was built with all standard super cub/aviation parts and techniques.-350 hours on airframe and engine since Built in 2003.-O-320-A2B 160 hp engine overhauled by BJ custom engines. (Not an experimental engine)-Engine Pickled every winter that it wasn’t flown on skis. (all since 2005)-F ...

1972 Cessna A185E

Tue, 08 Aug 2017 20:40:57 -0900


1930 hrs Total Time420 hrs since factory reman in 1996Engine was pickled from 2009 to 201620 hrs since prop overhaul in 2008New paint spring 2017All new Stainless fastener kit 2017Induction converted to F style with Cessna service kit SE 75-5Factory Float kitLong Range fuel4 raised fuel capsRecent Selkirk interior, headliner,and rubber floor matCessna jump seatsNice looking cowl, horizontal, and g ...

1961 Cessna 210A

Thu, 20 Jul 2017 20:20:29 -0900


5370 hrs685 hours since factory reman in 2000.960 lb useful load.Door stewardsCollins Audio Panel with Marker beaconTwoKY 197 commsKN 53 NavKing HSIKNS80 NAV/RNAV/DME/Glideslope receiverCollins ADFCollins TransponderNeeds annual.Needs Hydraulic leaks addressedNeeds sheet metal repairs around landing gearBooks for over $40k.Used parts are readily available including sheet metal and hydraulic assemb ...

3-Blade MT Propeller, MTV-9-D, 210cm--Price Reduced!

Wed, 28 Jun 2017 20:16:48 -0900


3-Blade MT Propeller for sale. MTV-9-D, 210cm.Like new, as removed from 185 with 550.30 hours since blade overhaul and 260 hours TT since new in 2014. Gray blades and white tips. Like pictured prop, but white spinner.STC and use permission included.New one is about $16k.All specifications subject to verification.

1968 Cessna 172I Factory Float Plane

Mon, 26 Jun 2017 18:53:08 -0900


2100 hrs Total TimeO-320-E2D 2100 hrs. good compression and not making metal.No damage historyFactory Float kitSeaplane Prop (currently installed but not shown in photos and in excellent shape)EDO 2130 floats7.00x6 nose and 8.50x6 main tires field approvedLP Aero windshield new in 2000BAS shoulder harnessesWell maintained and complete logsOriginal paint and interior but still quite functional.King ...

TWO Sets of EDO 6470s w/Beaver Rigging

Wed, 21 Jun 2017 16:13:14 -0900


Two sets of EDO 6470 floats with DeHavilland Beaver rigging. Appear to be in good shape and ready to install. Very motivated seller. MAKE AN OFFER for either set or both.All specifications subject to verification.

Airglas LW3600 Skis

Wed, 21 Jun 2017 16:13:10 -0900


Landes Airglas LW3600 two position fixed wheel penetration skis.Certified on Cessna 180/185Good condition.All specifications subject to verification

Decent set of EDO 2960 Floats

Wed, 21 Jun 2017 16:13:07 -0900


If your 2960s are clapped out, you could pop this set on quickly and you could probably run many more years reliably. The sheet metal is probably even a little better than average. Surface corrosion on bottoms is typical, but not extensive. Paint isn’t gorgeous, but it’s better than a lot of Lake Hood and Campbell Lake junk you see these days. Big rudders, but no hatches. Listed price is outright ...

MT 2-Blade 210cm Propeller--Price Reduced!

Wed, 21 Jun 2017 16:13:03 -0900


Mt PropellerModel MTV-15-B-C-R(M) 2-blade 210cm Constant Speed Reversing PropellerTotal Time Since New: 280.3 new in 2010Blades appear to be in excellent conditionHeated storage since Jan. 2013Fits Aviat Husky and 180HP Super CubsAll specifications subject to verification.


Wed, 21 Jun 2017 16:13:00 -0900

Propeller balancing--$375 at Seaplanes North. We are equipped and trained with a new Aces 2020 tool and are ready to do your prop balancing at Lake Hood! Call us today for more information!

EDO 2000 Floats with 172 Rigging

Wed, 21 Jun 2017 16:12:56 -0900


Fairly Good paint, oversize rudders, decent sheet metal. Two EDO hatch kits new in the wrapping included (not installed).All specifications subject to verification.

Attention all Cessna owners from 170 through 210!

Wed, 21 Jun 2017 16:11:28 -0900

The Cessna pilot secondary seat stop offer expires December 31, 2016. Reimbursement is for the kit only--it does not include labor.This is a safety enhancement kit being offered for free from Cessna. It prevents your seat from sliding back during rotation and climb out. Parts are free!Call 907-248-7070 or email cessnaparts2 @ to schedule your installation today!

Seaplanes North is now a factory authorized Robinson Helicopter Service Center!

Wed, 21 Jun 2017 16:11:16 -0900

ANNOUNCING: Seaplanes North is now a factory authorized Robinson Helicopter Service Center for Robinson R44 helicopters. We have trained and experienced technicians, proper tooling—including a rotor balancing system—and parts in stock. We are very excited to have added Robinson R44 support while retaining our diverse fixed wing capabilities, so please come visit us for any of your light aircraft t ...

Heavy Duty Landing Gear for the Husky Approved!!

Wed, 21 Jun 2017 16:11:01 -0900


Finally! The heavy duty landing gear for the Aviat Husky is now PMA approved and available for 'bolt on' replacement!Also available, one set of used standard Husky Heavy Duty A1B Gear Legs. P/N 35017 505 and 506 with 200 hours total time. Removed from Husky to install Wheel-ski gear. Crated and available for shipment. $950 each.

Folding split bench seat for 172.

Wed, 21 Jun 2017 16:10:52 -0900


Folding split bench seat for 172 serial numbers 17263459 thru 17272884. $500All specifications subject to verification.

HD PA-18 plus 6'' Atlee Dodge Landing Gear

Wed, 21 Jun 2017 16:10:44 -0900


Heavy duty PA-18 plus 6” Atlee Dodge landing gear with bungees/hydrosorbs, Cleveland wheels and brakes (heavy duty 185/206 type wheelswith 1.5 inch axles), 7.00x6 tires, Atlee Dodge Step,and AWB 2500 type ski fittings.All specifications subject to verification.

Good Aqua 3526 Floats w/206 Rigging--Price Reduced!

Wed, 21 Jun 2017 16:10:19 -0900


Good Aqua 3526 floats with 206 rigging including pork chops. Good paint, hatches, good sheet metal.All specifications subject to verification.

Cessna Citation III--Must Sell!! Price Reduced!!

Wed, 21 Jun 2017 16:09:41 -0900


Serial Number: 650-0125Airframe:Total Time 6737 hoursLandings 5881I-IV Inspections Sept. 2007 / Greensboro Service CenterPhase V Inspection c/w January 2008 WESTAR.Fresh Doc 8 and Doc 11 inspectionsEngines: TFE731-3C-100SBoth Engines 380 hrs Since MPIJust off MSP Gold. Great candidate to go back on if desiredAdditional highlights/options:- PATS Push Button APU- Dual 40 AMP Hour Ni-Cad Batteries- C ...