Subscribe: Dodge Diesel - Diesel Truck Resource Forums
http://www.dieseltruckresource.com/dev/external.php?type=rss2
Added By: Feedage Forager Feedage Grade A rated
Language: English
Tags:
bolts  converter bolts  cushions  diesel  dodge diesel  dodge  gen  lights  new  problem  ram  seat cushions  seat  time time  time  won start 
Rate this Feed
Rate this feedRate this feedRate this feedRate this feedRate this feed
Rate this feed 1 starRate this feed 2 starRate this feed 3 starRate this feed 4 starRate this feed 5 star

Comments (0)

Feed Details and Statistics Feed Statistics
Preview: Dodge Diesel - Diesel Truck Resource Forums

Dodge Diesel - Diesel Truck Resource Forums



This is a website dedicated to Dodge Ram Trucks powered by the Cummins Turbo Diesel Engine.



Last Build Date: Sat, 25 Nov 2017 00:54:57 GMT

 



93 First Gen won't start

Fri, 24 Nov 2017 21:57:37 GMT

I have a 1993 5.9 l dodge cummins..it worked fine for a long time and then one day I go to move a ladies fifth wheel 50 miles away and when I turn off it will not turn on again...changed the LP on...



Stick or Auto??

Fri, 24 Nov 2017 04:34:22 GMT

What's the good, the bad and the ugly on each of the transmission options? Curious as to mileage numbers. I realize there is a torque penalty going with a manual (I believe horsepower too)...



P pump motor in first gen auto?

Fri, 24 Nov 2017 03:51:23 GMT

I was wondering how would you make the p pump work with throttle cables and kick down cables and stuff



Interior, gauge backlight, dash backlight and cargo lights not funcional

Fri, 24 Nov 2017 00:49:56 GMT

Happy Thanksgiving to all... I have been reading every forum possible and have not come across the answer. *Vehicle*: 2005 Dodge Ram, SLT *Problem*: Interior lights (dome and map lights),...



Hello, New Guy here with a 1st gen!

Thu, 23 Nov 2017 20:46:52 GMT

Hello all, Finally I am back in a dodge. Had a 97 diesel I drove around from time to time on our ranch. It was rode pretty hard and had a lot of issues from time to time. Finally we just parked it...



Can't count to 6

Thu, 23 Nov 2017 06:42:32 GMT

I'm trying to install a new tranny in a 95 2500 with a cummins auto trans. My problem is that I couldn't count 6 converter bolts so the tranny came out without the converter. I left two bolts in it....



Happy thanksgiving to all and theirs.

Thu, 23 Nov 2017 00:21:50 GMT

And be careful out there.



'04 hard start when warm

Wed, 22 Nov 2017 18:59:40 GMT

'04 5.9 always starts cold with a little cranking. Occasionally won't start when warm (after normal driving). I am guessing it could be a high pressure fuel problem as I have been told that...



Geno's Garage '94-'02 Ram Passenger Seat Cushions

Wed, 22 Nov 2017 14:48:17 GMT

Image: https://www.genosgarage.com/images/forum/FORUM-SEAT-CUSHIONS_DTR.jpg *'94-'02 Ram Passenger Side Seat Cushions* Now available from Geno's Garage are new passenger side seat cushions...



brake lines !

Wed, 22 Nov 2017 06:45:30 GMT

hi well i finely have the dreaded brake line leek beside the fuel tank ! soooo, has anyone used any of the brake line kits from e bay or others ? how about the stainless kits ?? ...



can we add 3rd gen power/heated mirrors to 2nd gen?

Wed, 22 Nov 2017 03:09:27 GMT

i have a 2001 SLT Laramie, has power locks. it has cheap looking tow mirrors on it now, they look like chinese versions of the OEM mirrors. and there is a hole on the A-pillar for a controller,...



Tailgate clip latches

Tue, 21 Nov 2017 22:46:04 GMT

Getting ready to sell my 91.5 I picked up last April, and had to fix the unable to open tailgate. Found that the plastic clip latches were worn, and one busted throughout. Local Dodge dealer had...



Hub/rotor bolt size and type

Tue, 21 Nov 2017 17:00:16 GMT

Just pulled my rear hub assembly off of my 2012 3500 dually. According to a video I watched the bolts to separate the rotor from the hub were suppose to be 15mm bolts but appear to be torx(E-socket)....



HELP pitman arm confusion

Tue, 21 Nov 2017 14:48:52 GMT

I have 06 4x4 with level kit upgraded steering linkage was told on there needed new pitman do to different angle of the dangle ordered 09 pitman did not fit do to different box shaft size diameter...



12 valve monitors?

Tue, 21 Nov 2017 02:11:28 GMT

Ive had horrible luck with gauges on my truck and don’t particularly like the way they look on the a piller. I’m looking at getting screen monitor to replace my gauges. What monitors are out there...