Subscribe: Business: Industrial Mechanical Articles from EzineArticles.com
http://ezinearticles.com/rss/Business-Industrial-Mechanical.xml
Preview: Business: Industrial Mechanical Articles from EzineArticles.com

Business:Industrial Mechanical Articles from EzineArticles.com





Published: Tue, 27 Jun 2017 07:24:38 -0500

 



Which Machine Is Good For Metal Wire Straightening?

Mon, 26 Jun 2017 14:17:18 -0500

The machine you need for metal wire straightening is an engineering device. Its job is to straighten distorted metallic wires into straight pieces.



Industrial Weighing Scales - Key Business Benefits of Calibration

Mon, 26 Jun 2017 09:53:45 -0500

Did you know that EU verification of weighing scales is a legal requirement when selling products by net and average weight? Routine calibration of all weighing equipment is essential if your business is to achieve reliable, accurate and consistent measurements. Failure to do so could result in additional costs, loss of customers, legal issues and loss of manufacturing capacity.



Seven Applications For Mast Cable Assemblies

Sun, 25 Jun 2017 21:39:36 -0500

Mast cable assemblies are present in just about every facet of modern life. From the personal technology you use in your own household to the business tools you utilize in your workplace, these important structures provide the signal and communicative abilities we need for every day life. That is why it is so very important to utilize well-built, well-supported, functioning assemblies. Take a look at the following common uses for this special type of technological formation:



3 Types of Printed Circuit Boards

Fri, 23 Jun 2017 13:10:02 -0500

The printed circuit board (PCB) is an electric circuit with electronic components and a common feature in a wide range of devices, such as radar systems, radios and beepers. It is constructed in several different ways to match its intended use.



3 Valuable Cutting Tools You Can Use

Fri, 23 Jun 2017 07:27:36 -0500

Steel is one of the most common types of metals you will find. If you are looking to install it or fix an issue, you have to cut it. There are many types of tools you can use to do it. These tools include: Compound snips Also known as aviation snips or tin snips, these scissor-like units allow you to easily cut through thin steel. These units are ideal when you are looking to make quick, short cuts on extremely thin steel.



Graphene-Based Composite Nanomaterial Can Prevent the Overheating of Lithium-Ion Batteries

Thu, 22 Jun 2017 09:44:06 -0500

Although the performance of lithium-ion batteries (LIBs) have been remarkably improved in the past decades, there is a big risk in the use of this type of battery: they can catch fire when they are subjected to abuse. Researchers from Stanford University have developed a nanocomposite material which can be included into the electrodes in order to prevent the explosion of the battery.



Why Your Electrical Panel Keeps Tripping

Thu, 22 Jun 2017 08:40:58 -0500

The Electrical Panel is as important in the industry as heart in the body. It feeds the power to subsidiary circuits as the heart pumps the blood into the veins. By the time, it gets old and chances it starts creating troubles like unwanted noise, a sudden trip down, sparkling, etc. These are the signs that you need to upgrade your electrical panel for the safety purpose. You will risk your life and limb in case you ignore any such sign. However, most of the time, people only face the problem of constant tripping. It's a risky situation when the device trip and shuts off the electricity to whatever you are working on.



Factors Affecting The Tissue Paper Napkin Business

Thu, 22 Jun 2017 08:38:09 -0500

Starting a new business might come with different phrases and difficulties, which affect the journey. Choosing a relevant product to produce that has greater demand in the market determines the future revenues a little bit.



Silver Plated Copper Wires For The World Of Machines And Tools

Thu, 22 Jun 2017 08:29:54 -0500

Wires are the main component of any industry no matter whether you are operating on a small scale or a large one because a small wrong link can interrupt the entire production, which cause extreme loss to the environment as well as the facility. It also causes the loss or delay in the production resulting in the financial losses. To prevent such situations and overcome these circumstances, one should install the high quality wires and cables in the industry.



Everything You Should Know About The Hardness Testers

Thu, 22 Jun 2017 08:28:54 -0500

The hardness of any material is substantial, which is measured on the different scales to determine the mechanical abrasion of any product. This concludes how sensitive the material is for the scratch and the dents, which makes hardness testers into the use from generations.



A Quick Look Into The Unique Features Of Different Nut Styles

Thu, 22 Jun 2017 08:20:08 -0500

Nuts are also one the family member of hardware and come in all shapes and sizes for different fastening applications. Almost all the application where there is a need of the bolt, the use of nuts is compulsory as they complement one another. However, to ensure the strong fastening that stays longer you have to be very careful while buying them. The fact is, there are several types of nuts out there that make it confusing for the buyer to choose an ideal option for a certain application.



Worried About Unpredicted Spray Outs? Prevent Them With Flange Guards

Thu, 22 Jun 2017 08:19:10 -0500

Working in a chemical industry, means you are in constant touch with a number of hazards. One of the common hazard most of the chemical industries witness is sudden leakages or spray outs. These leakages from the failing joints or pipelines may cost you the fortune and create a constant threat to your life. Therefore, it is better to be safe than sorry. And in an order to prevent the condition or to minimize the damage at least you should install Flange Guards at your workstation.



Things You Need To Know About Pultruded Products

Thu, 22 Jun 2017 07:29:15 -0500

Since FRP products are famous for several benefits like corrosion resistance, high strength and being flame retardant, these have high demand in different industries. Although these products are mainly used in heavy-duty industries, but there can be other applications of these materials too, such as in manufacturing FRP window frame pultrusion die, etc.



What Is A Parallel Operation Of A Transformer And Why It Is Necessary

Wed, 21 Jun 2017 08:18:09 -0500

Nowadays, we rely on different appliances for any of our work, which requires electricity. Therefore, it has now become an important part of our lives and without this; we cannot even image a single day. A transformer is the best way to deal with the problem as it transmits power to your doorway without changing the frequency.



Why Is It Important To Inspect The Transformer Regularly?

Wed, 21 Jun 2017 08:17:38 -0500

Transformer, no doubt, is a static device that smartly supplies the power from one source to another. The device because of its static nature requires less attention, but it is important to go for the periodic inspection to avoid any unwanted breakdowns or troubles during the working of the device.



Isolation Transformer - A Device To Regulate The Industrial Applications

Wed, 21 Jun 2017 08:16:16 -0500

An artistic combination of right appliances and several protector devices for such appliances are necessary to flaunt any of the industrial applications. Choosing precisely manufactured and artfully designed device like isolation transformers for the applications makes them perfect and let the manufacturer enjoy most productive benefits.



A Concise Introduction To The Tissue Paper Napkin Machine

Sun, 18 Jun 2017 14:15:46 -0500

Tissue Paper Napkins are a lot in demand because they are widely used for wiping wet hands or cleaning face. They are very light, absorbent and hygienic; therefore, you may find them in almost every sector. The device that plays a vital role in its production because of efficient, effective and easy operation is known as a Tissue Paper Napkin Machine.



8 Useful Benefits of Plastic Injection Molding

Sat, 17 Jun 2017 13:27:10 -0500

The plastic injection molding method is one of the most used techniques for producing a high volume of plastic parts. This method relies on a heated barrel and a special mold cavity to create the precise shape and size of different plastic objects.



Five NDT Methods On Which Most Industries Rely On

Fri, 16 Jun 2017 07:55:29 -0500

The application of Non-Destructive Testing is critical to a number of industries. Highly advanced NDT inspection methods ensure prevention of accidents and promote safety for workers and equipment during over hauling and maintenance. Non-Destructive Testing is getting really popular in Singapore and Malaysia.



CNC Milling Tips

Thu, 15 Jun 2017 11:02:15 -0500

Computer numerical control milling or CNC milling as its popularly known, is a subtractive fabrication process where you begin with a solid block of the stock material and slowly you cut it away revealing the desired object. The milling process makes use of blades that resemble those that you find in drills. During the milling process, the end mill moves perpendicular to the axis of the rotating tool while holding the block of material being cut. When working, use the computer to control the motion of the clutter and block.



Necessity of a Water Treatment Plant for Businesses

Wed, 14 Jun 2017 09:30:35 -0500

Water treatment plant can be highly beneficial for any business because it saves operating costs. Also, it reduces maintenance and increases efficiency & output of the industrial equipment. With the use of equipment and tools, comes their wear and tear because impure water increases the maintenance charges of industrial equipment.



5 Aerospace Sector Market Trends Aiming to Pump Positive Growth

Wed, 14 Jun 2017 09:21:13 -0500

With the rise in the volume of traveling all across the globe, there has been a precipitous growth in the aviation & aerospace industry. The rising share of traveling population is causing a significant development for this sector, which is working fluently to present classic solutions to address the passengers in the most fruitful manner.



Pretreatment And Grit Removal From Sewage Water To Repurpose It

Wed, 14 Jun 2017 08:09:56 -0500

Pretreatment of the sewage water refers to the preliminary removal of the sludge constituents such as Harsh Solid Particles, Oil, Grit, Grease, Trash, etc. The sewage treatment plants are manufactured with the treatment technology to help you reduce the abrasion of mechanical parts and enhance the life of the sanitation infrastructure. They are ideal for removing the accumulated solids and minimize the blockages of public drains due to dumping down sewage water of industries in the drains. The treatment includes screening, floating, settling, and filtration mechanisms to make the sewage water safe for disposing off in the public drains or the main drains.



A Guide To Selecting Your Industrial Oven

Wed, 14 Jun 2017 08:07:45 -0500

An Industrial Oven is a sort of heated chamber that is mainly used for industrial applications such as curing, drying, heating, and baking of parts or final products. If you ever stepped into the market to purchase a right option for your industrial application, so, probably you know that there are countless options to confuse you. Don't worry; we are here to help you. In this article, we discuss what points you need to consider before your purchase the oven. This selection guide may help you to make a wise decision that secures your investment. So, let's start.



Stop Believing In These Transformer Myths At Soon As Possible

Wed, 14 Jun 2017 07:48:44 -0500

Myths are like a never-ending story that misleads our path and nothing is more difficult than competing with them. Debunk all those old wives tales before they create the situation of loss for you and your business. So, let's get started.



Enlightening Tale of Drive Belts - The V-Belt

Tue, 13 Jun 2017 10:14:47 -0500

Are you aware that your auto motive's engine bay contains so many unsung heroes? One significant among them is the drive belts. It is just not possible for your automotive engine to run properly without these drive belts.



10 Ideas for More Efficient & Productive Warehouse Operations

Mon, 12 Jun 2017 14:53:07 -0500

According to the U.S. Bureau of Labor Statistics, tripping, falling, and slipping account for the majority of "general industry accidents." In fact, statistics show slip and fall accidents make up 15% of all accidental deaths, 25% of all injury claims and - shockingly - 95 million lost work days each year.



The Importance of Installation Practices

Thu, 08 Jun 2017 07:02:32 -0500

When you are dealing with warehouses, you would realize that there is a lot of work that is often involved with it. One of the most important works that you would need to practice is the thing of racking.



The Intricacies of Warehouses Pallet Racking

Tue, 06 Jun 2017 10:44:44 -0500

The world of warehouses is quite a complex one. It has its own ecosystem feeding of the people and being served by them as well.



Safety Railing Systems and Its Importance

Tue, 06 Jun 2017 10:44:13 -0500

When you have worked hard at something, you know that it becomes important to understand its efficiency. This is the case with things like pallet racks.



An Introduction To The Most Popular Types Of Bolts Available For Different Applications

Tue, 06 Jun 2017 07:55:23 -0500

Have you ever stepped into the market to buy a bolt or some other fastener for any of your applications? Do you know what are the different types, grades, sizes, dimensions and other configurations are available in a bolt? Do you know how much it is important to select the right option? If you don't have answers to any of the above questions, so, this article is for you. Here, we discuss the most popular and widely used type of bolts that are probably used in different applications. So, what are we waiting for? Let's get started.



3 Major Types of Sensors

Fri, 02 Jun 2017 11:01:17 -0500

Sensors are intended to detect a change in a wide range of events or quantities. Most sensors are built to produce an optical output signal or electrical signal after detecting a particular type of input.



5 Benefits of Using CNC Machines

Fri, 02 Jun 2017 11:00:19 -0500

Many businesses and personal shops continue to rely on conventional machining. But the CNC machines have the ability to provide the most efficient production process.



Basic Components Of A Tissue Paper Napkin Machine

Fri, 02 Jun 2017 08:57:00 -0500

Making the surroundings hygienic is not just our responsibility but is also a requirement to keep the common contagious diseases at bay. We don't realize the important of small things like washing hands before and after meals, brushing teeth twice a day and using tissue napkins for cleanliness but they have a significant role in our lives.



What Are The Cost Saving Advantages Cable Trays Offer?

Fri, 02 Jun 2017 08:17:42 -0500

While constructing a building or high-rise structure one of the major engineering feats is cable management. A lot of things you need to take care while picking an ideal cable management system to manage the open wiring of the building. Perfection and dependability is a must while selecting the best option for managing your building wiring.



Weighing Equipment For Hazardous Environments - Understanding ATEX Requirements

Thu, 01 Jun 2017 13:27:51 -0500

If you work in explosive atmospheres or potentially hazardous/flammable industrial environments, and are looking to purchase or hire industrial weighing equipment, you need to be aware of ATEX. But what does that actually mean, and why is it so important that it forms a part of your decision-making process?



Progressive Die For Sheet Metal Cars

Wed, 31 May 2017 14:05:44 -0500

A die is a specialized tool that manufacturing industries use to shape or cut metals using a press. Similar to molds, dies are often customized to the item they pretend to create. Products made with dies range from paper clips to complex and advanced technology pieces.



The Principles And Objectives Of Material Handling

Wed, 31 May 2017 09:03:19 -0500

Materials handling is the art and science of moving, packing, storing and protecting of substances in any form until they are brought to further use. Like any other work material handling also works on certain principles and objectives. These have been defined and described in details us under: Planning Principle: It is imperative to have a definitive plan before executing any work.



Basics of the Liquid Filling Machine

Wed, 31 May 2017 08:53:23 -0500

The preferred liquid filling machine in a factory is certain to depend on a variety of factors. It not only has to match the type of liquid and bottle, but should also complement the current budget and future growth.



Spray Outs Are Perilous, You Will Risk Your Life And Limb If You Overlook Them

Wed, 31 May 2017 08:04:17 -0500

Do you know while working in the chemical industry you are in constant danger of hazardous spray outs or leakages? Do you know these can be dangerous for not only your plant but for personnel too? If you know all these facts, so, why are you playing with fire just to save some bucks? You should buy and install Flange Guards to be on the safe side. Do you know ignoring them is like skating on thin ice, which is not safe in any manner? So, stop doing it right away, especially when you have the effective solution to deal with the problem that too in your budget.



Steps To Treat The Sewage Water Before Dumping It Into Public Drains

Wed, 31 May 2017 08:00:06 -0500

Technologies are meant to make our life comfortable but the excessive use of such technologies is harming the environment to the extreme through polluting the surroundings. Industries and the waste it generates is the main reason of pollution. They dump their waste anywhere crazily and leave the public drainage system contaminated with a lot of pollutants. A large number of industries are dealing with dangerous chemicals and poisonous substances, they dump down the waste left after the process into the public drains causing many diseases and degrading the environment harshly.



Pan Mixer And Its Elementary Benefits For The Industrial Applications

Wed, 31 May 2017 07:51:29 -0500

You must have seen a lot of manual work at the construction sites and doing manual work instead of machinery work takes insufficient time to complete the project. To ease the production and fasten the process pan mixers are used widely for the main work of mixing the cement and preparing the homogenous mixture of concrete for the construction process.



Various Types of Milling Machines

Tue, 30 May 2017 15:26:31 -0500

The article illustrates the basic concept of a milling machine and how the idea of a milling machine has been refined over the time. Furthermore, it points out the importance of automation in milling processes.



The Role Of Galvanized Cable Trays In Supporting Wire Systems

Fri, 26 May 2017 08:46:46 -0500

The cable trays are changing to meet the demand of different industrial applications and today's market needs. At first, the wire management supportive device is used only in heavy industrial facilities to support the power cable with greater diameter.



Major Attributes Of Using Silver Coated Copper Wires For Industrial Wiring

Thu, 25 May 2017 08:44:15 -0500

Undoubtedly, whenever you heard about the silver coated copper wire, so, the first thing strikes your mind is, do they really exist? Yes, they do exist and now the question is why copper wires are coated with silver? Basically, silver wires are quite expensive and have better conductivity, therefore, most of the people fail to purchase it. However, with this amalgamation of two metals, you are able to get the benefit of both in the minimal possible price. These are extremely thin and affordable at the same time and available in different length and sizes. It has lots more benefits to offer, scroll down to figure them all.



How To Choose An Ideal Electrical Panel System

Thu, 25 May 2017 08:43:59 -0500

The fuses are there before the circuit breakers took over the world of electric appliances. The breakers help to turn the power to your homes and industries on and off in order to protect the wires from the damage when a short circuit or overload of current occurs. The single-use current interrupter melts with the over surge of the current and protect the entire electrical panel from the damages as well as impacts of the short circuits. On the other hand, fuses are the thin pieces of the wires, which are enclosed in a heat resistance glass.



Isolation Transformers - A Device Designed For Energy Efficiency And Reliable Performance

Thu, 25 May 2017 08:07:05 -0500

There is a wide gap between the demand for the power and its supply, which cause irregularities in the output produced with the power usage. To end this scenario, transformers were invented in an extensive assortment so that the electrical device can give flawless supply of power through regulating the distribution and transmission of the same.



5 Questions To Ask When You Need Electro-Mechanical Assembly For Complex Devices

Thu, 25 May 2017 07:15:26 -0500

The business of electro-mechanical assemblies involves a machine that generally converts electrical energy into a mechanical outlet. It is an extremely important process for just about any factory, industrial business, or even average household. These devices that incorporate these assemblies are vital to the efficient production of any industry. If you find yourself in need of one of these energy-transforming mechanisms, then consider the five following questions to get you started in your custom cable assembly:



What Causes a Stud Bolt to Loosen

Wed, 24 May 2017 10:32:55 -0500

Stud bolts are highly beneficial when dealing with larger steel like stainless steel pipes and steel flanges, due to its strength, wider flexibility of length, and ability to more or less permanently fasten the joint. Aside from the obvious strength issue, the problem that may occur with stud bolts and nuts is the possibility of it to self-loosen as the time passes, and eventually put the integrity of joints at risk, most especially when exposed to vibrations and movements.



Versatile Diesel Engine - Cash Cow of Diesel Engine Dealers

Tue, 23 May 2017 10:47:51 -0500

A compression ignition engine better known as the diesel engine is the extremely sturdy workhorse of several domestic and commercial applications of today. With the modern versions known for their low operating costs and longer lifespan, all diesel engine dealers will vouch for the versatility of this product.



Amazing Things About Galvanized Concertina Wire

Tue, 23 May 2017 08:26:40 -0500

Security has become one of the top concerns of the people all around the world regardless of their field. From IT industry where the information is sensitive and vulnerable to theft to farms where animals are vulnerable to attacks by predators. Everyone is finding a way to make his valuables secure from the people having bad intentions. And as necessity gives rise to innovation and invention the problem got solved by the use of fencing.



Importance Of Recycling The Waste Water

Tue, 23 May 2017 08:19:08 -0500

Water is life and therefore, we should never waste it. However, in today's time, we do exactly the opposite. In a number of industries, tons of water use in different applications and most of them get wasted and mix with the rivers and ponds, which even pollute our environment and harmful to the aquatic life. In an order to save our environment from getting polluted and reduce the wastage we should recycle it with the help of a Waste Water Treatment Plant.



Protect Pipelines And Prevent Injuries With Flange Guards

Tue, 23 May 2017 08:18:45 -0500

Pipeline failure, spray outs or leakage, these are a few common problems encountered by the chemical industries. All these circumstances are very vulnerable and create the risk of fiscal loss and life too. Fundamentally, the pipelines contain harmful chemicals or mist formation and at the time when it no longer able to stop them flowing, so, it explodes like hell that put your workstation and workers both in danger. In an order to avoid such dicey situations Flange Guards are used. These protective shields are made of PTFE, polyethylene, polypropylene or stainless steel material, which is able to endure extreme climate, temperature, perilous chemicals, and gasses. These may disseminate the force of leakage and ensure the safety of your workstation from any loss due to the spray outs.



Back To Basics - Things To Remember While Ordering The Bolts

Tue, 23 May 2017 08:18:29 -0500

The bolt is an important member of the hardware family that is used universally for affixing joints with more than one object temporarily. Their applications are very diverse, ranging from daily house activities to heavy industrial parts. These may get affix with a nut or washer that provide support and ensure better bonding while fastening the objects. When it comes to purchasing, it is important to have correct information, so, you can make the right choice. If you are ordering bolts for the very first time, so, this guide will help you make the ideal decision. So, what are you waiting for? Let's get started.



Servo Voltage Stabilizer - A Foolproof Solution Of Power Problems

Tue, 23 May 2017 08:04:50 -0500

No matter, where you are at home, office or any manufacturing unit, wherever there is the use the power chances it gets fluctuate. Most of the time these alterations in the voltage level are remains unnoticeable.



What Are The Advantages Of Using Silver Plated Copper Wires Over Traditional Wires?

Tue, 23 May 2017 08:03:33 -0500

Wires are the basic element to deliver constant electricity to different places. The metals have good conductivity so that they are used widely for making wires and copper is the first choice of all the electrical applications. However, the copper has great amount of oxygen in it, which leads to rusting very soon. This reduces the longevity and durability of the application. To prevent this situation, the wires are plated with the metal like silver because hardly anyone can afford pure silver ones for the electrical applications. To save the costs and reap the benefits, the traditional copper wires are coated with the noble metal silver. This enhances all the beneficial physical properties of the wires and make them aesthetically eye catchy.



A Brief Comparison Between Cut Threads And Rolled Threads Of A Nut

Tue, 23 May 2017 08:03:13 -0500

Thread of a mechanical fastener defines its grip in the application regardless of its type and variety. The threads of a fastener are created ideologically with two techniques by either cutting or rolling. The pacing technologies are making us enable to get closer with the modern tools as to get the perfection and precision in all the applications. The fasteners are used widely for assembling two more parts together at one place.



Signs That Indicate Your Electrical Panel Is Not Working Properly

Tue, 23 May 2017 07:58:03 -0500

Electrical Panel is a device that is mainly designed to feed electricity to the sub-circuits of a high-rise building or any other structure. It ensures the proper flow of electricity throughout the workplace and is also considered as a load center. It accepts power from the main source and supplies it further throughout the industry. The device is the life-line of your electrical system; therefore, it is important to buy the right option to get assured about your workplace safety. This is because a wrong selection of the device may create a lot of trouble and host harmful effects.



Plugs And Their Importance Inside The Industry

Fri, 19 May 2017 09:08:10 -0500

When talking about Plugs we often refer to the ones which can be seen inside the various electrical appliances and equipment inside our homes and the workplace. However, in this article we will be referring to plugs in a different context altogether. These small and tiny sized devices are used for various industrial and manufacturing purposes. We will have a look at these unique gadgets and work out what exactly it is that they do.



What Are Wedge Anchors?

Fri, 19 May 2017 07:52:06 -0500

Anchors are available in a wide variety of sizes, types, and materials as per the requirement of the industrial applications. Wedge anchors are one of the most famous assortments for the most complex concrete industrial applications used in the array. The design of the fasteners allows the long thread settle down in the concrete structures firmly. A hole is drilled through the dry and old concrete structure as to insert the anchor.



Servo Voltage Stabilizer - A Bane Or A Boon For Your Industry

Fri, 19 May 2017 07:48:16 -0500

Getting worried about the problem of power cuts or voltage fluctuations? And, finding the ideal path to deal with the situation? A Servo Voltage Stabilizer takes you out of the problem.



How Are Bubble Wrap Packaging Materials Manufactured?

Thu, 18 May 2017 13:40:36 -0500

Bubble out bags are probably the most commonly used and cost-efficient packaging materials available as on date. These bags are made from bubble wrap sheets that were inadvertently discovered in 1957 by 2 engineers - Alfred Fielding and Marc Chavannes while they were sealing 2 shower curtains and found a pattern of air bubbles between the two sheets.



4 Types of Clear Plastic

Thu, 18 May 2017 11:14:50 -0500

The use of clear plastic is extremely popular in manufacturing a wide range of products, such as acrylic display cases. It is often favored by designers because it is a cost-effective and flexible material to use compared to traditional glass which has a greater risk of breaking.



Importance Of An Isolation Transformer In Hospitals

Thu, 18 May 2017 08:58:47 -0500

An Isolation Transformer is a device that is known to give you protection against the electric shock and prevent the situation of short-circuits or fire accident. It separates one part of an electric circuit from the main powers, which ensures the smooth performance of the unit.



Why And How To Measure The Paint Coating Thickness Using Gauges

Thu, 18 May 2017 08:28:09 -0500

Thickness measuring instruments are used to determine the thickness of the dry paint coating before and after the curing process. This helps to reveal the spots to be repainted as well as to measure the thickness of the first coating for further processing.



Common Causes Of Transformer Failures

Thu, 18 May 2017 07:55:10 -0500

The transformer is the most effective and economical device that transmits power from one source to another without disturbing the frequency. The device is a modern invention; thus, require lesser care than any other type of electrical equipment.



Warehouse Management System - A Boon to Industry

Wed, 17 May 2017 20:28:31 -0500

Changing and rapidly developing world always need solutions which could be well efficient in curbing the problems and additionally being time saving, cheap and easily available. Individuals are always in the dire search of new ideas combined with existing technology to bring out products which tend to be best of their kind.



Hot Air Oven - A Device That Helps To Kill The Germs

Wed, 17 May 2017 08:54:17 -0500

In the business world, gift giving is more than just a tradition. It drives incredibly intrinsic and financial outcomes. But finding an amazing gift takes a considerable thought as there is a huge variety to confuse you. Choosing gifts for those who are in your continuous touch seems easier than struggling for those who are new for you. While discovering some new ideas, you will come up with the coolest range that fits your pocket and your considerations as well.



The Role of Humans in Automated Production Processes

Wed, 17 May 2017 08:39:08 -0500

Humans create machines and program them to perform tasks. It is the power of imagination and thinking that differentiate humans from machines. Industrial automated machines of today are intelligent and can do various things without human intervention. However, these automation machines need human to help solve and accomplish complicated problems during the manufacturing processes.



Pros Of Using The Flange Nuts For Your Industrial Operations

Wed, 17 May 2017 08:01:04 -0500

A standard hex bolt looks like a flange nut from one side but the bottom of the nut is widened into a circular flange through creating a bell-like shape. The fastener is used widely for different applications, which depends on the style of the head. Some of its variants do not offer premium-locking capabilities but still have some engaging benefits when used properly in the applications. In addition, it provides better grip options on the surface of the joints. They act like a non spinning washer because at the end they have a wide flange. It distributes the pressure of the nut over the part being secured. They are also known from the names spin lock, tooth, or face nuts, etc.



Flange Guards - Your First Step To Safety

Wed, 17 May 2017 07:55:49 -0500

The problem of spray outs or leakage is common but cautious and in an order to minimize the damage you should install the Flange Guards. It is your first step to the safety, which is important to take on time. These are designed to prevent spray outs or leakage from flanges by interposing a barrier between the chemicals, mist formation and external environment.



Top 5 Best Uses Of Carriage Bolts

Wed, 17 May 2017 07:55:17 -0500

Carriage Bolts are the types of threaded fasteners that come with round or domed head and a square shank that protrudes from its flat side. These are distinguished from other bolts from its shank cross section. In an order to fasten them correctly, you have to use either a nut or washer along with it. It is available in a variety of sizes, materials, and plating to meet the diverse application need at its best.



Industrial Painting Contractor

Tue, 16 May 2017 13:31:44 -0500

This painting contractor handles all the components of a painting job for bigger facilities. This includes cleanup, application, and preparation. They are usually an independent contractor who will provide an estimate for the job and then manage it from start to finish. When it is a mid-level project, the industrial contractor may also help their employees with the job.



Smart Manufacturing in Plastic Injection Molding

Mon, 15 May 2017 14:30:34 -0500

The drive to glean more - and better - data from industrial equipment and systems will continue to improve productivity in the plastic injection molding sector as technology, sensors, and systems continue to evolve, to the benefit of the molders and their customers. "Smart Manufacturing," a.k.a. the Internet of Things (IoT), Industrial IoT (IIoT) and Industry 4.0, uses sensors to gather data, networks to connect machines, and data analysis to improve efficiencies in today's smart factories.



The Features of Duplex Stainless Steel Shutoff Valves

Mon, 15 May 2017 10:14:08 -0500

This article makes a brief introduction about the main features of duplex stainless steel shutoff valves. These shutoff valves have a wide range of applications.



All You Need To Know About Behavior And Quality Of The Silver Coated Copper Wires

Mon, 15 May 2017 09:26:14 -0500

Wires are defined as the flexible strand made out of the different metals depending on the type of the application for transmission of electricity and the electrical signals. They come in various forms and are made in different sizes, which vary according to the design of the device. The electricity behaves differently in the long wires than the short ones as per the proximity effects.



Galvanized Cable Trays - A Robust Wire Management Solution For Industries And Commercials

Mon, 15 May 2017 09:12:57 -0500

Construction of a building involves three major engineering feats such as civil, mechanical, and electrical. While dealing with the electrical wiring in a building it needs a lot to take care of. Such wires need to be managed effectively which is the most essential and integral part of all the processes.



6 Benefits of Induction Heating

Fri, 12 May 2017 11:09:57 -0500

Induction heating provides an economical, efficient and fast method to heat a wide range of conductive materials to an exact temperature. It is highly effective at heating a large area or the more specific part for complete control over the work.



Designing and Planning for a Commercial Kitchen

Fri, 12 May 2017 10:24:08 -0500

As the years pass on there will also be changes in new technology in the field of Kitchen equipment which are used for Restaurant, Industries, Hospitals, Hostels, Canteens, etc. The fabricated kitchen types of equipment and catering equipment are clients requirement.



Making a Commercial Kitchen

Fri, 12 May 2017 10:23:44 -0500

Incorporating appropriate equipment in Commercial kitchen working stations is the main task. The types of cuisines prepared by restaurants and preparation techniques of the master chef depend on the number of workstations and equipment present in a Commercial kitchen.



Bain Marie in Culinary Systems

Fri, 12 May 2017 10:23:08 -0500

The name comes from the Latin term Barnum Mariae that literally means Mary's bath - from which the French Bain de Marie, and Bain-Marie, is derived. The device's invention has been popularly attributed to Mary an ancient alchemist.



Understanding The Cutting Plotter

Fri, 12 May 2017 07:46:37 -0500

If you are in the sign and billboard making business you need a cutting plotter. This is a unit that helps you to easily cut your signs thus saving you a lot of time. The units not only make your work easy, they also make it more accurate thus helping you to come up with professional designs within a very short time.



Different Kinds Of Bolt Heads

Wed, 10 May 2017 08:20:42 -0500

A Bolt is an important fastener usually made of different metals such as regular grades and stainless steel and come with different plating of zinc, hot-dip galvanized, etc. These are not only available in different material grades but also with different heads. Yes, it's true that the head of each and every bolt is not the same. However, its head is the important factor that helps to identify its type easily. Lack of knowledge about their head may confuse the buyer and to make the selection and identification easier, here we highlighted some of the common types of bolt heads that you should know to make a wise decision. So, let's get started.



Back To Basic - Monitor The Condition Of A Transformer To Avoid A Power Outage

Wed, 10 May 2017 08:10:49 -0500

Transformers are significant as they are the most expensive equipment used for the purpose of power distribution throughout the industry. Needless to say, many of their kind can be found easily in the marketplace and the thing that makes most of them similar is their windings and cores.



Fact Or Fiction - Uncover The Truth Of A Servo Voltage Stabilizer

Wed, 10 May 2017 08:09:25 -0500

A Servo Voltage Stabilizer is the one that mainly designed to control the voltage fluctuations, which otherwise damage the appliance and affect your productivity. They work on the principle of servo motor concept and create a safety wall around your appliance, so, variation in voltage never affects its production and performance.



Common Myths You Might Have About VFD Panels

Tue, 09 May 2017 08:29:21 -0500

VFD or Variable Frequency Drive Panel is a kind of motor controller, whose main function is to drive an electric motor by varying the voltage supplied to it. Aside from this, it has many other uses like keeping all components in one panel and keeping dust, dirt, and water away. The device has great demand in the market but still, there are many people who have a lot of misconceptions about the device. Take a look at some silly myths people have and make sure you do not believe any of the false about using the device.



How To Deal With Heat And Noise Produced By A Transformer

Tue, 09 May 2017 08:19:24 -0500

Transformers are very much important for conveying power from one circuit to another in specified voltage and ampacity with electromagnetic induction. The static device is important and has all the bells and whistles you need to transmit power safely throughout the industry.



Know the Advantages of Using Fiber Patch Cables

Mon, 08 May 2017 09:11:56 -0500

In this age of advanced technology fiber optics has an important role in communication and data transfer. Whatever transfer of data that you see in this era is the direct result of using the optical networks. The waves of the light are used in them to send and receive the data signals.



Portable Hardness Tester - A Device To Measure The Mechanical Abrasion Of Metals

Mon, 08 May 2017 08:38:26 -0500

The contractors and structural engineers has to bear great load of responsibilities and they are expected to complete complex projects with the given budget and within the given time frame. As they can be held liable for the unsafe constructions, they have made so they need to be extra careful about ensuring the sound quality.



Short And Snappy Description About A Surface Roughness Tester

Mon, 08 May 2017 08:29:26 -0500

Slips and spills are harmful no matter you are simply on the floor or the road. One can manage the slipperiness of the floor with the most advanced tool - Surface Roughness Tester. The device determines the safety of the floor and saves your money by avoiding the slip injuries.



Bells And Whistles Of A Paper Bag Making Machine

Mon, 08 May 2017 08:28:41 -0500

The paper bags are made from different types of papers i.e. printed, plain, colored, textured, embossed, etc. but the raw material for the output is none other than the virgin paper, which is created using the right combination of softwood and hardwood trees.



Hoses - Transporting the Fluids Efficiently

Sat, 06 May 2017 13:01:51 -0500

Hoses are basically hollow tubes made of flexible materials like rubber, special grades of polyethylene (like LDPE and LLDPE) etc. These are generally used for transport of fluids from one place to another. They are not to confused with pipes. Pipes are made of rigid materials whereas hoses as mentioned above are flexible.



Guide To Buying PVC Sheets

Fri, 05 May 2017 07:27:36 -0500

Plastic is one of the most versatile materials in the market that you can use in a wide variety of applications. The use of plastic ranges from making of children's toys to medical applications. Plastic sheets are one of the most common types of plastics that you will come across. Just like the other plastic materials they have a wide range of applications. When buying them you need to consider a number of factors such as:



Do You Know Why Polyethylene Wax Is Widely Used In Paint?

Wed, 03 May 2017 10:35:32 -0500

What is Polyethylene? Polyethylene is a thermoplastic polymer with variable crystalline structure and available in a wide range of applications depending on the particular type. In fact, several researches reveal that it is one of the most widely produced plastic in the world, i.e. around tens of millions of tons are produced worldwide each year.



PTFE Flange Guards - A Clear Safety Solution For Liquid Releases

Wed, 03 May 2017 08:05:34 -0500

The flange guards are made with the clear material so that the liquid release can be seen through the shield providing visual indication. Such shields are suitable for corrosive chemicals as it is safe for use due to the technical fabric and Teflon thread used for stitching which prevents spillage as well as contamination. For strong acids and higher temperatures and pressures, PTFE materials are excellent as they have high resistant chemical properties for most materials. Typically used acids, alkaline, caustic, solvents, fuels, lubrications, oils and or fluids, the device is designed to provide high benefits of resisting spray outs, leakage, and mist formations.



All You Need To Know About Shotcrete Applications

Wed, 03 May 2017 07:57:07 -0500

Destructing the structure and restructuring it back will burn a hole in your pocket. To the rescue, the device named shotcrete is used throughout the industries to apply clear coatings of concrete to the structures in order to save them from devastation. The machine comes with a hosepipe for the precise application and to make structures look aesthetically beautiful even when they are repaired. The traditional method of repairing the broken structures is old school and nobody wants that, as they are excessively clumsy. Replacing them with the modern methods of restructuring them is the new thing, which is grabbing the attention of many.



7 Types of Die Cutting Operations

Mon, 01 May 2017 09:45:40 -0500

Die cutting is a highly versatile fabrication method. This type of cutting machine has the ability to perform multiple operations, such as those related to curling, coining, or bending sheets of metal.



Top Tips To Buy Powder Coating Ovens

Mon, 01 May 2017 08:19:38 -0500

The coating and surfacing of a material or an article is important because coating treatment helps in improving the performance of the material used even in the harsh environments. The operation is performed with the help of automated device called Powder Coating Oven. There is always a riff between choosing liquid paints and powder coating. The latter one is always a wining hero because it creates different shades of colors with an ease and without any overlapping.



The Beginner's Guide To Understanding Mast Cable Assemblies

Mon, 01 May 2017 08:15:27 -0500

If you have ever driven down a road and peered into the sky, only to see a tall pole-like structure with rods popping out of the sides, then chances are good that what you were seeing were mast cable assemblies. These tall communication devices are some of the most common cable assemblies found in the electronic world. Not only do they serve as housing devices for communicative wire signaling, but they are generally among the most affordable and practical electronic methods for communications on the market. If you find yourself curious about these wiring powerhouses, then take a look at the following guide to help you decide whether this structure is right for your electrical needs:



Gold Plated Connectors - Guidelines for Using Gold

Sun, 30 Apr 2017 09:51:49 -0500

Generally, gold is specified as a contact coating. When using gold plated connectors they are used for low-level signal voltage and where high reliability is a big considerate. If you have a defective connector and there is no opportunity to re-mate or repair it, you can use a protective gold coating to give it an added margin of safety. When using gold coatings on electrical contacts there are some formulated guidelines that you should use.