Last Build Date: Tue, 27 Sep 2016 19:20:46 -0400
Mon, 18 Apr 2016 08:31:04 -0400Standard on FasTrax High-Speed Doors, LED Countdown® works with door’s internal timers and uses LED lights to let workers know how much time there is before door closes. When door is approached, up arrow will signal that door is opening. Once forklift or personnel exit threshold, timer will count down. Numbers will appear in white lights until 2 seconds remain; then numbers appear yellow, cautioning that door is preparing to close. Once red downward arrow appears, door will shut.
Fri, 18 Mar 2016 08:31:04 -0400Targeting female timepiece wearers, 5-piece G-SHOCK S Series Military Collection resists effects of shock and magnets and is water-resistant to 200 m. Auto LED light with afterglow is one of several features: 4 daily alarms, hourly time signal, 1/1,000 sec stopwatch, countdown timer, and 48-city world time. With matte coloring and slender band, watch comes in three 2-tone colorways – Blue with Rose Gold, Olive with Rose Gold, White with Gold – and 2 monochromatic colorways: ash grey and white.
Wed, 16 Mar 2016 08:31:03 -0400Available in 1.5 x 0.8 x 0.6 mm CSP, SiT156x/7x series perform several functions – RTC reference, connectivity sleep clock, audio subsystem reference – in wearable, IoT, or mobile systems. All products utilize TempFlat MEMS™ technology and deliver ±5 ppm all-inclusive frequency stability, and SiT1568 also offers in-system, auto-calibration feature. Along with programmable temperature sensing update rate, TCXOs offer ability to drive multiple loads and 300 msec startup...
Mon, 16 Nov 2015 08:31:05 -0400Model 405AE features on-delay and interval timing modes that each features 8 selectable time ranges and SPDT contact output configuration (5 A resistive). In on-delay mode, contacts transfer at time-out. In interval mode, contact transfer occurs when power is applied to device and released at time-out. Power options include 110 Vac and 24 Vac/dc, and 1/16 DIN housing carries IP40 rating for face plate. Analog dial is optimized for readability, and LED status indicator is standard.
Fri, 22 May 2015 08:31:04 -0400Providing simultaneous hardware time stamping support of up to 128 Precision Time Protocol clients, TimeProvider 2700 PTP GM Clock delivers synchronization in mobile backhaul network and small cell aggregation locations. Increased capacity enables operators to deliver accurate frequency and phase to double number of end nodes. Clock is optimized to help mitigate asymmetric timing errors and meet stringent synchronization requirements of 4G/LTE networks.
Fri, 01 May 2015 08:31:04 -0400With Model SEL-2488, users can synchronize end devices with submicrosecond accuracy using demodulated IRIG-B and/or Precision Time Protocol. Network clock can serve as PTP grandmaster clock, supporting both default profile (IEEE 1588-2008) and power system profile (IEEE C37.238). Capable of synchronizing time for up to 4 independent networks with time-stamp accuracy of 100 ns, Model SEL-2488 can meet timing needs of industrial and utility applications.
Tue, 14 Apr 2015 08:31:04 -0400Based on coherent population trapping (CPT) technology, Quantum™ Rubidium Miniature Atomic Clock (MAC) SA.3X series delivers performance with monthly aging of <1-10, 1 sec ADEV <3-11, and operational stability after turn on. Size of 2.0 x 2.0 x 0.7 in. and power consumption — 5 W at 25°C (14 W max during warmup) — meet needs of platforms that mount directly on PCBAs, eliminating need for heat sink or fan. Product also meets LTE holdover requirements for several...
Fri, 27 Mar 2015 08:31:07 -0400Water resistant to 200 m, PRO TREK PRW-3500 employs Triple Sensor Version 3 Technology featuring direction, pressure, and atmospheric sensors. Wearers can check as well as record information on outdoor conditions, and operation is facilitated, even by gloved hands, by button size, non-slip surfaces, and register ring shape. Other features include Multi-Band 6 Atomic Timekeeping technology, LED-backlit digital display, and battery life of ~23 months at full charge.
Fri, 06 Mar 2015 08:31:04 -0400Offering 10 operating modes in one unit, Model 385AR series works with proximity switches, solid state devices, and potential-free contact encoders. Respective input speeds of 3 Hz, 30 Hz, and 5 kHz are standard, and unit incorporates 12 Vdc 30 mA sensor power supply with short circuit protection and options for front panel or remote reset. Supplied in 48 x 48 mm housing featuring 2 SPST (NO) 5 A @ 230 Vac contacts, unit offers dual setpoints, programmable input scaling, and batch...
Fri, 05 Dec 2014 08:30:28 -0400Able to generate reference clock with <20 nsec accuracy, 12.2 x 16.0 mm NEO-M8T and 17.0 x 22.4 mm LEA-M8T offer high sensitivity (-157 dBm signal acquisition) with assisted GNSS that enables accelerated start up even inside structures with limited sky view. Reference clock is derived from multi-GNSS, including GPS, GLONASS, and BeiDou. Receiver Autonomous Integrity Monitoring and alarms, 2 configurable time-pulse outputs, as well as survey-in and single satellite timing features are...
Mon, 15 Sep 2014 08:32:31 -0400Designed for critical infrastructure and harsh environments, Model SEL-2488 receives GNSS time signals and distributes precise time via multiple output protocols, including IRIG-B and NTP. Device provides time delay compensation for antenna cables and output cables on per-port basis to further optimize time distribution accuracy. For security, clock features Syslog Ethernet standard for event messaging, role-based accounts and LDAP for user authentication, and secure HTTPS web interface.
Fri, 22 Aug 2014 08:33:14 -0400Supplied in 3 x 3 mm QFN-12 package, XR81112 series offers output frequencies from 10 MHz to 1.5 GHz. Clock synthesizer utilizes flexible delta-sigma modulator and VCO in PLL block optimized for power efficacy. PLL can operate from input system clock or crystal and incorporates both integer divider and high-resolution (<1 Hz) fractional divider for flexibility to generate any clock frequency. With core current consumption of 20 mA, series is configurable for LVCMOS, LVDS or LVPECL outputs.
Tue, 22 Jul 2014 08:30:56 -0400Accepting 110 Vac (50 or 60 Hz) supply voltage, single-function Model 175SO-110 has low-profile (17.5 mm), DIN rail-mount housing and provides timing control within OEM and industrial applications. UL-listed and CE-certified product features 5 A SPDT relay output contact configuration, LED indication, and 10 unique, user-selectable time ranges that can be selected from 0.1 sec to 3 hr. Time range and scale are configurable via front facing knobs.
Mon, 23 Jun 2014 08:29:09 -0400Synchronized wireless and wired clock systems automatically adjust for Daylight Saving Time (DST) and include remote programming capability. This functionality eliminates concerns over changing time every spring and fall and negates need to be on-site to schedule changes.
Wed, 11 Jun 2014 08:30:48 -0400Targeting utility substations and industrial SCADA applications, MultiSync 100 1588 GPS Clock lets grid assets, including wide-area protection, monitoring, and control devices, operate at optimal level for secure and continuous flow of power. Solution incorporates universal power supply and provides 1588/C37.238 time synchronization over Ethernet network. Measuring 45 x 110 x 155 mm, clock is intended for DIN-rail mounting and hardened for utility substation applications.
Wed, 28 May 2014 08:31:47 -0400LN CSAC model 090-01921-000 employs ULP crystal oscillator within control loop of atomic clock. Phase noise performance of -87 dBc/Hz at 1 Hz offset and noise floor of -155 dBc comes with power consumption of 240 mW, and Allan deviation at 1 sec improves to <2-11. This low power frequency reference and timing module produces atomic clock accuracy and crystal oscillator signal purity that can operate using battery power to provide low power signal generation for range of...
Mon, 05 May 2014 08:30:29 -0400Supplied in QFN-10 and TSSOP-8 packages footprint compatible with industry standard synthesizers, XR811xx series offers output frequencies from 10 MHz to 1.5 GHz with ultra-low phase noise jitter of <200 fS. Synthesizer design utilizes flexible delta-sigma modulator and wide-ranging VCO in PLL block, and core current consumption is 20 mA. PLL can operate from either input system clock or crystal and incorporates both integer divider and high-resolution (<1 Hz) fractional divider.
Fri, 01 Nov 2013 08:34:23 -0400Supplied in EMI-shielded package, SRO-5680 utilizes SmarTiming+® technology to intelligently synchronize, discipline, and control any Stratum-1 reference, such as GPS/GNSS, Cesium, Hydrogen Maser, and T1/E1, at 1 ns resolution. This GPS/GNSS synchronized Rubidium oscillator isolates precision timing and frequency signals on 3 SMA connectors: 1 PPS reference input, 1 PPS output, and 10 MHz RF output. Intended areas of use include defense, radar, and communications applications.
Mon, 28 Oct 2013 08:30:05 -0400Controlled via 100 Mbit Ethernet and USB interfaces, 5-channel Model T680 is suited for industrial and laboratory test and measurement. Each channel can snapshot time of rising edge of one electrical input, to 12.2 ps resolution with 48-bit range. In time-stamp mode, individual time stamps may be read, and in TIC mode, channel 0 may be used as start time reference for channels 1–4, with option to acquire times after or before/after start event.
Mon, 28 Oct 2013 08:30:04 -0400Tested for shock and vibration to MIL-STD-810F, TSync-cPCI leverages Spectracom timing and synchronization engine in 3U board compliant to PICMG 2.0. This compact PCI (cPCI) timing board can synchronize its clock to various signals, including GPS L1 (civilian), encrypted GPS (SAASM), GLONASS L1, IRIG time code, or precision pulse-per-second. Choice of on-board clock with 5 nsec resolution provides time and frequency accuracy even in case of loss of external reference.