Subscribe: ThomasNet News - Thermal & Heating Equipment
http://news.thomasnet.com/newsxml/3167
Preview: ThomasNet News - Thermal & Heating Equipment

ThomasNet News - Thermal & Heating Equipment



ThomasNet News is a service of ThomasNet.com



Last Build Date: Sat, 19 Aug 2017 15:04:10 -0400

 



850°F Gas-Heated Cabinet Oven from Grieve

Wed, 16 Aug 2017 11:31:14 -0400

No. 843 is an 850°F (454°C), gas-heated cabinet oven from Grieve, currently used for curing paint on steel and aluminum test coupons at the customer’s facility. Workspace dimensions of this oven measure 20” W x 20” D x 20” H. 100,000 BTU/HR are installed in a modulating gas burner, while a 600 CFM, ½-HP recirculating blower provides horizontal airflow to the workload. This Grieve oven has 6” insulated walls, an aluminized steel exterior and Type...

This story is related to the following:
Thermal & Heating Equipment

Search for suppliers of: Ovens | Cabinet Ovens



YORK® Variable Refrigerant Flow (VRF) Gen II has an extended operating range.

Tue, 15 Aug 2017 19:01:43 -0400

Re-engineered with an outdoor unit line, YORK® Variable Refrigerant Flow (VRF) Gen II HVAC equipment includes an extended operating range and updated duct units for the indoor unit. With a 122 degrees F high operating range, the unit’s cool down temperature can go as low as -4 degrees F. With a -13 degrees F  to 59 degrees F outdoor temperature operating range, single modules are available in 6-, 8-, 10-, 12-, 14-, and 16-ton capacities.

This story is related to the following:
Thermal & Heating Equipment

Search for suppliers of: Heat Recovery Systems



Ipsen USA Responds to Diverse Market Demand in Q2 2017

Fri, 11 Aug 2017 09:55:10 -0400

CHERRY VALLEY, IL - Shipping 15 atmosphere and vacuum furnaces last quarter, Ipsen USA continues to provide diverse, effective heat-treating solutions to customers around the world. This equipment was sent to China, Hong Kong, India, Japan, Saudi Arabia and the United States - all in support of the Aerospace, Commercial Heat Treating and MIM industries. The shipments included: Two large, vertical (bottom-loading) MetalMaster® vacuum furnaces, each with a 120” (3 m) diameter work...

This story is related to the following:
Thermal & Heating Equipment

Search for suppliers of: Furnaces | Industrial Furnaces | Vacuum Furnaces



Watt-Flex ® Cartridge Heaters Warranted Removable from Bores

Wed, 09 Aug 2017 10:20:03 -0400

IPSWICH, MA - Watt-Flex® Cartridge Heaters are warranted removable from bores by their manufacturer, Dalton Electric Heating Co., Inc. Because their unique split-sheath design prevents warping, the primary cause of bore seizure for conventional cartridge heaters, Watt-Flex® Heaters are the only cartridge heaters warranted removable from bores. If removal by drillout from a properly sized bore is necessary, Dalton Electric will replace any damaged heaters free of charge. Split-sheath...

This story is related to the following:
HVAC
Thermal & Heating Equipment

Search for suppliers of: Electric Heating Devices | Heaters



ThermoCompâ"¢ Device diminishes the errors caused through internal ...

Fri, 04 Aug 2017 12:33:42 -0400

ThermoComp™ Mechatronic Device is used for both linear motor and ball-screw linear stages. Unit comes with integrated hardware, sensors and compensation algorithm and reduces stage inaccuracy caused due to thermal effects. Product can eliminate up to 90% of errors caused in linear positioning stages. The units are available on Aerotech PRO Series stages and are operated through Aerotech A3200 controller software.

This story is related to the following:
Controls & Controllers
Thermal & Heating Equipment

Search for suppliers of: Controllers | Thermal Systems



Hoistable Induction Generator comes with vibration isolation frame.

Fri, 28 Jul 2017 12:23:09 -0400

With 1,500 lbs weight (including water for the chiller), Hoistable Induction Generator System can be operated in -20 to +120°F temperature range. Unit’s frame features four tie-down eyes that are useful in securing the framework to a truck bed. Unit comes with fitted tarp and 2,000 lbs rated lift certified frame.

This story is related to the following:
Thermal & Heating Equipment

Search for suppliers of: Induction Generators



Wisconsin Oven Ships Sand Core Drying Ovens to the Foundry Industry

Fri, 28 Jul 2017 10:50:43 -0400

East Troy, WI - July 21, 2017 - Wisconsin Oven Corporation shipped two (2) Natural Gas Fired Enhanced Duty Walk-In Series Ovens to the foundry industry. The batch ovens will be used for drying sand cores used in the casting process of a variety of parts. The sand core dryers have the capability to dry water and resin from 6,000 pounds of sand cores and a 600-pound steal load car from 70°F to 450°F within 2 hours. Each of the work chamber dimensions of these sand core dryers is...

This story is related to the following:
Thermal & Heating Equipment

Search for suppliers of: Ovens | Drying Ovens | Industrial Ovens



Lindberg/MPH Ships Atmosphere Box Furnace to the Steel and Mining Industry

Fri, 28 Jul 2017 10:50:11 -0400

July 26, 2017 - Lindberg/MPH announced the shipment of an electrically heated, rod over-bend atmosphere box furnace to the steel and mining industry. This is the second heat treating furnace of this kind that the customer has ordered from Lindberg/MPH. It is designed to meet the customer’s specific process based on the previous existing model they had ordered. The atmosphere box furnace has work chamber dimensions of 15”W x 30”D x 12” H and a maximum temperature...

This story is related to the following:
Thermal & Heating Equipment

Search for suppliers of: Furnaces | Atmosphere Furnaces | Box Furnaces | Industrial Furnaces



Lindberg/MPH Ships Cyclone Box Furnace to Heat Treating Industry

Wed, 26 Jul 2017 11:34:06 -0400

July 14, 2017 – Lindberg/MPH announced the shipment of a gas fired cyclone box furnace to the heat treat industry. The box furnace will be used for heat treating steel parts and is the second Lindberg/MPH furnace that has been purchased by this customer. The work chamber of this heat treat furnace is designed to accept a basket with dimensions of 48” W x 84” D x 48” H and has a maximum temperature rating of 1250°F. The heating/combustion system consists of one...

This story is related to the following:
Thermal & Heating Equipment

Search for suppliers of: Furnaces | Box Furnaces | Industrial Furnaces



500°F Top Loading Oven from Grieve

Wed, 19 Jul 2017 09:45:04 -0400

No. 844 is a 500°F (260°C), top loading oven from Grieve, currently used for drying water from racks of piston rings at the customer’s facility. Workspace dimensions of this oven measure 48” W x 48” L x 36” D. 40 KW are installed in Incoloy-sheathed tubular heating elements, while a 4200 CFM, 3-HP recirculating blower provides horizontal airflow to the workload. This Grieve oven has 4” insulated walls, an aluminized steel exterior and Type 304, 2B...

This story is related to the following:
Thermal & Heating Equipment

Search for suppliers of: Ovens | Industrial Ovens | Top Loading Ovens



High Turndown Furnace is equipped with microprocessor.

Tue, 18 Jul 2017 10:23:40 -0400

Offering up to 16:1 seamless turndown per furnace, High Turndown Furnace is suitable for variable volume applications. Available on IGX make-up air unit,ERCH dedicated outdoor air unit, RV and RVE rooftop ventilators, product is ideal for schools, hospitals, hotels, and commercial office buildings. Unit provides minimum firing rate and lower furnace cycling on part-load.

This story is related to the following:
Thermal & Heating Equipment

Search for suppliers of: Furnaces | Air Furnaces | Tubular Furnaces



EchoThermâ"¢ HPLC Column Chiller/Heater comes with stable ...

Fri, 14 Jul 2017 13:18:55 -0400

Suitable in chiral and biomedical chromatography applications, EchoTherm™ Programmable HPLC Column Chiller/Heater features 5-program memory of 10 steps per program. Capable of repeat any program from 1 to 99 times automatically, unit can hold columns up to 30 cm long by ¼ in. or 3/8 in. diameter in mounting clips. Designed with injection counter (30-day timer with user settable Auto-Off), chiller meets UL, CSA, and CE standards.

This story is related to the following:
HVAC
Thermal & Heating Equipment

Search for suppliers of: Chillers | Heaters



Fulton Thermal Corporation Offering Refurbished Heaters from Stock

Sat, 08 Jul 2017 13:49:16 -0400

Used Thermal Heaters, Refurbishment Services Now Available Pulaski, NY - July 7, 2017 - Fulton Thermal Corporation, a global manufacturer of thermal fluid heat transfer products and a provider of innovative energy management solutions, now offers used, refurbished thermal fluid heaters from stock to customers in need of quick-ship order fulfillment. The used heater stock program allows customers experiencing production losses to restart processes with minimal downtime and at a significantly...

This story is related to the following:
HVAC
Thermal & Heating Equipment

Search for suppliers of: Heaters | Water Heaters



LEWCO Completes Large Batch Oven for Aerospace Industry; Temperature Uniformity Exceeds Expectations

Sat, 01 Jul 2017 12:50:34 -0400

Recently, LEWCO, Inc. delivered another Enhanced Duty walk-in oven to a longtime customer in the aerospace industry. This is the sixth oven they have purchased from LEWCO in the past three years. It be used to will dry sheets of plaster for aircraft cabins. The oven has a maximum operating temperature of 500?F. and features a top mounted heater-box with a 1,500,000 BTU direct-fired natural gas burner. Two 30,000 CFM circulation fans deliver horizontal airflow evenly throughout the...

This story is related to the following:
Thermal & Heating Equipment

Search for suppliers of: Ovens | Batch Ovens | Industrial Ovens | Walk-In Ovens



850°F High Temperature Walk-In Oven from Grieve

Thu, 22 Jun 2017 12:10:13 -0400

No. 852 is an 850°F (454°C), high temperature walk-in oven from Grieve, currently used for heat treating and baking varnish at the customer’s facility. Workspace dimensions of this oven measure 60” W x 96” D x 72” H. 120 KW are installed in Incoloy-sheathed tubular heating elements, while a 7800 CFM, 5-HP recirculating blower provides combination airflow to the workload. This Grieve oven has 8” insulated walls and a 4” insulated floor. Additional...

This story is related to the following:
Thermal & Heating Equipment

Search for suppliers of: Ovens | Industrial Ovens | Walk-In Ovens



Lindberg/MPH Ships Large Chamber Utility Box Furnace to an Automotive Parts Supplier

Fri, 16 Jun 2017 16:17:30 -0400

June 14, 2017 – Lindberg/MPH announced the shipment of an electrically heated, large chamber utility box furnace to an automotive supplier. The furnace will be used for batch testing aluminum castings on a daily basis at a temperature of 500°C. The work chamber dimensions of this heat treat furnace are 24” W x 24” D x 24” H and it has a maximum temperature rating is 1100°C. The Large Chamber Utility Box Furnace is available in nine chamber sizes to meet...

This story is related to the following:
Thermal & Heating Equipment

Search for suppliers of: Furnaces | Box Furnaces | Industrial Furnaces



Thermal Product Solutions Ships Gruenberg Truck-In Oven to a Pet Care Company

Sat, 10 Jun 2017 03:06:25 -0400

New Columbia, PA - May 26, 2017: Thermal Product Solutions, a global manufacturer of thermal-processing equipment, announced the shipment of a truck-in oven to a pet care company to heat treat steel and glass. The truck-in oven dimensions are 60” W x 96” D x 78” H and the maximum temperature rating is 260°C. The oven is designed to maintain a temperature uniformity of ±5.5°C, at a test temperature of 230°C. The Gruenberg oven is constructed in a...

This story is related to the following:
Thermal & Heating Equipment

Search for suppliers of: Ovens | Industrial Ovens



Thermal Product Solutions Ships Tenney Vacuum Drying Ovens to a Medical Device Manufacturer

Thu, 08 Jun 2017 09:06:43 -0400

New Columbia, PA – May 16, 2017: Thermal Product Solutions, a global manufacturer of thermal-processing equipment, announced the shipment of five (5) Tenney Vacuum Drying Ovens to a medical device manufacturer. The chambers will be used for vacuum drying of suture material. These vacuum ovens have temperature ratings of +15° C above ambient to +60° C and work chamber dimensions of 24.125” W x 24.5” D x 24.125” H. The pressure range is sire level to 200,000...

This story is related to the following:
Thermal & Heating Equipment

Search for suppliers of: Ovens | Drying Ovens | Industrial Ovens | Vacuum Ovens



350°F Belt Conveyor Oven from Grieve

Thu, 01 Jun 2017 16:10:26 -0400

No. 897 is a 350°F (177°C), belt conveyor oven from Grieve, currently used for preheating trays of parts prior to potting operations at the customer’s facility. Workspace dimensions of this oven measure 36” W x 120” D x 15” H. 30 KW are installed in Incoloy-sheathed tubular heating elements, while a 6000 CFM, 5-HP recirculating blower provides vertical downward airflow to the workload. This Grieve belt conveyor oven has a 48” long open belt loading zone...

This story is related to the following:
Thermal & Heating Equipment

Search for suppliers of: Ovens | Conveyor Ovens | Industrial Ovens



Wisconsin Oven Ships Electrically Heated Batch Core Forming Oven to a Leader in the Composites ...

Thu, 01 Jun 2017 13:04:49 -0400

East Troy, WI - May 23, 2017- Wisconsin Oven Corporation shipped an electrically heated batch core forming oven to a leader in the composites industry. This composite curing oven will be used for their patented process of forming honeycomb material for aircraft engines. The work chamber is 10’0” W x 6’0” L x 5’0” H and the maximum temperature rating is 800°F. The walls and ceiling feature a “CAN” style construction and includes 6” of...

This story is related to the following:
Thermal & Heating Equipment

Search for suppliers of: Batch Ovens | Core Baking Ovens | Industrial Ovens