Subscribe: ThomasNet News - Sensors, Monitors & Transducers
http://news.thomasnet.com/newsxml/2399
Preview: ThomasNet News - Sensors, Monitors & Transducers

ThomasNet News - Sensors Monitors & Transducers



ThomasNet News is a service of ThomasNet.com



Last Build Date: Tue, 28 Feb 2017 00:50:47 -0500

 



World Standard Weld Purge Monitor®

Sat, 25 Feb 2017 13:52:50 -0500

To ensure non-oxidised, zero colour welds are achieved when welding metals such as stainless, duplex and chrome steels, titanium and nickel alloys, a Weld Purge Monitor® (oxygen monitor) must be used to measure the oxygen level before and during welding. The World Standard PurgEye® 100 IP65 Weld Purge Monitor® from COB Industries is available at a low cost, avoiding the requirements to fill entire tubes and pipes with expensive inert gas and avoiding the need to guess when the...

This story is related to the following:
Sensors Monitors & Transducers
Welding Equipment & Supplies

Search for suppliers of: Welding Monitors



Compact FCS PermaNet F Leak Noise Sensors for Tight Underground Spaces

Sat, 25 Feb 2017 13:51:07 -0500

Sensors install in minutes and detect leaks overnight Milford, OH (February 24, 2017) – PermaNet F leak noise sensors from FCS provide water network managers with a fixed base cellular network to monitor leakage. The compact sensors were designed to quickly install into small underground spaces, providing readings with dramatically reduced noise interference compared to those taken with above ground sensors. PermaNet F sensors work by recording noise levels and tracking consistent...

This story is related to the following:
Sensors Monitors & Transducers

Search for suppliers of: Sensors



Load Pins offer overload capacity of up to ±250 kN.

Sat, 25 Feb 2017 08:21:36 -0500

Available in 5113 and 5117 models in 3 rated capacities ranging in ±25 to ±60 kN. Using foil strain gage sensing technology, units are bonded on to zinc-plated hardened alloy steel body. Model 5113 and 5117 measures 38 mm and 25 mm respectively. Load pins are suitable for off-road vehicles, plowing vehicles, cranes, hoisting gear, pulley shafts and winches. Load pins provide reliable and repeated measurements of force, tension, load, and overload parameters.

This story is related to the following:
Fasteners & Hardware
Sensors Monitors & Transducers

Search for suppliers of: Pins | Load Pins



ILPS-27 Series Inductive Linear Position Sensors are equipped with ...

Sat, 25 Feb 2017 08:19:48 -0500

Used in motor sport vehicles, automotive testing, solar cell positioners and packaging equipment, ILPS-27 Series Inductive Linear Position Sensors are designed in 50 to 450 mm range. Featuring 27 mm diameter anodized aluminum housing, units are available in radial cable exit and axial termination versions. Offering contactless operation and excellent stroke-to-length ratio, ILPS-27 Series provide choice of four analog outputs.

This story is related to the following:
Sensors Monitors & Transducers

Search for suppliers of: Inductive Sensors | Linear Position Sensors



True Flat G-Series Monitors feature flat front surface.

Thu, 23 Feb 2017 16:53:31 -0500

True Flat G-Series Monitors provide high image quality with 1920 x 1080 resolutions. Featuring OSD Touch Keys, AR protective glass, Monitors are designed with VGA, DVI-D, HDMI and DisplayPorts. Available in 21.5 and 24 in. in RAL 9003 white plastic housing, panel PCs are programmed with CPU and GPU technology with 6th generation Intel Core i5-6300U processor. Meeting CE, UL, FCC standards, monitors are integrated with Single Board Controller and PCs.

This story is related to the following:
Computer Hardware & Peripherals
Sensors Monitors & Transducers

Search for suppliers of: Monitors | Flat Panel Monitors



Phantom®L6 ROV comes with six Tecnadyne® thrusters.

Thu, 23 Feb 2017 16:41:39 -0500

Suitable for infrastructure inspections, hydroelectric monitoring and exploration applications, Phantom®L6 ROV is equipped with active roll and heading gyro stabilization. Delivering 18,000 lumens output illumination and 110 lb vertical lifting force, unit features open-frame architecture and expansion bulkhead connectors. Offering diverse sonar integration options and five degrees of freedom maneuverability, product comes with dynamic rolling maneuvers.

This story is related to the following:
Sensors Monitors & Transducers
Test & Measuring Instruments

Search for suppliers of: Inspection Systems | Remote Monitoring Systems



Chemical Sight Gauges can withstand harsh fluids.

Thu, 23 Feb 2017 16:39:26 -0500

Chemical Sight Gauges are available in H-S3 and PH models. Featuring 316 stainless steel internal rods and aluminum locknut, H-S3 can be mounted to tank with 1.5 or 2 in. tank bushings and can measure up to tank depths of 12 to 120 in. Available with 1.5 or 2 in. tank bushings, PH model is made of high strength PVC gauge card.

This story is related to the following:
Sensors Monitors & Transducers
Test & Measuring Instruments

Search for suppliers of: Tank Level Gages | Liquid Level Tank Gages



HRS Series Sensor LEDs offer multiple viewing angle options.

Mon, 20 Feb 2017 12:18:13 -0500

Available in 0603 and 1206 packages, HRS Series Sensor LEDs offer 520nm λP and 525nm λD wavelengths. Suitable for heart rate sensor applications, units are designed in flat lens and dome lens versions. Product is useful for compact devices such as wearable electronics.

This story is related to the following:
Sensors Monitors & Transducers

Search for suppliers of: Sensors | Medical Sensors



KD-5100 Differential Measurement System features low power consumption.

Mon, 20 Feb 2017 12:14:40 -0500

Available in package of 2 x 2.12 x 0.75 in. thickness, KD-5100 Differential Measurement System features two sensors per channel matched precisely to give a nanometer resolution. Unit comes in rugged construction with mean time between failures 238,000 and 55,000 hours in space flight and tactical environments respectively. KD-5100 is suitable for night vision systems, precision telescope positioning, fast steering mirrors applications.

This story is related to the following:
Sensors Monitors & Transducers
Test & Measuring Instruments

Search for suppliers of: Measuring Instruments | Current, Voltage & Power Measurement Instruments



DG Series Thermistors feature 32 AWG dumet wire leads.

Sat, 18 Feb 2017 14:40:05 -0500

Available in 10 kΩ, 40 kΩ, 50 kΩ, and 100 kΩ resistance values, DG Series Thermistors feature 3.0 mW/°C dissipation constant and 6 s thermal time constant. Operating in -55 °C to +200 °C temperature range, units provide TCR of -3.9%/°C, -4.40 %/°C, and -4.75 %/°C and beta values of 3500 °K, 3950 °K, and 4200 °K. Designed in 1.5 mm diameter, thermistors allow for encapsulation of ring lugs and hex nuts.

This story is related to the following:
Controls & Controllers
Sensors Monitors & Transducers

Search for suppliers of: Thermistors | Temperature Measurement & Control Thermistors



What are the Advantages of Ultrasonic Wind Sensors?

Sat, 18 Feb 2017 13:08:29 -0500

Whether mechanical, ultrasonic or laser wind measurements: all measuring methods have technical limits. While for mechanical wind sensors the measuring element - cups and vanes - itself predominantly produces a disturbance in the flow field, for ultrasonic anemometers a disturbance can be caused by the sensor holder or housing construction. Only optical methods, e.g. LDA (Laser Doppler Anemometer), enable a disturbance-free measurement of wind speeds. However, for this particles are...

This story is related to the following:
Sensors Monitors & Transducers

Search for suppliers of: Sensors | Wind Sensors | Air Data Sensors



Coating Thickness Gauges offer automatic substrate detection.

Fri, 17 Feb 2017 16:35:27 -0500

Available in CMI155 and CMI157 models, Coating Thickness Gauges feature single-button operation. Designed with dual technology and integrated probe, units provide rapid inspection of paint, lacquer and protective single layer coatings on metal substrates. Units are factory calibrated and are rated to IP52 standards. Gauges are suitable for paint and powder coaters, coating inspectors, automotive, aerospace finishers and electroplating plants.

This story is related to the following:
Sensors Monitors & Transducers
Test & Measuring Instruments

Search for suppliers of: Coating Thickness Gages | Thickness Gages



Condor VPX-H265-SDI Encoder supports variable and constant bitrate configurations.

Fri, 17 Feb 2017 16:34:42 -0500

Capable of encoding and streaming two 3G-SDI, HD-SDI, or SD-SDI inputs simultaneously, Condor VPX-H265-SDI Encoder features dual 3G-SDI inputs. Designed with 1 Gbps Ethernet output and application programming interface, product can withstand vibration, shock, and humidity and can be operated in -40°C to 85°C temperature range. Supporting CoT, KLV and VANC metadata insertion, unit is used in manned and unmanned airborne applications.

This story is related to the following:
Communication Systems & Equipment
Sensors Monitors & Transducers
Test & Measuring Instruments

Search for suppliers of: Encoders | Video Encoders



Power Current Sensors enable high-precision measurements.

Thu, 16 Feb 2017 16:56:01 -0500

Designed with high power and low TCR resistors, Power Current Sensors offer resistance in 1 mOhm to 10 Ohms range and TCR down to 3 ppm. Using external heat sink, sensors provide three times more power rating. With ±0.01% load stability and resistance tolerance, units are lead free RoHS compliant and are available in 73 standard packages.

This story is related to the following:
Sensors Monitors & Transducers
Test & Measuring Instruments

Search for suppliers of: Sensors | Measurement & Inspection Sensors



ZPSâ"¢ Absolute Position Measurement System uses optical sensor ...

Wed, 15 Feb 2017 16:48:22 -0500

Enabling high-precision measurement and position control in optics, lens positioning system and fine stage controlling applications, ZPS™ Absolute Position Measurement System provides 0.01 nm resolution over 1.2 mm measuring range. Using fiber optic cabling for allowing use of remote sensor location, product can provide measurements on up to 64 synchronized channels. Product is used in scientific, industrial, and medical applications.

This story is related to the following:
Sensors Monitors & Transducers

Search for suppliers of: Motion Sensors | Position Sensors | Optoelectronic Sensors



K-TEK LMT Series Level Transmitters feature two-wire common transmitter design.

Wed, 15 Feb 2017 16:41:56 -0500

Available in LMT100 insertion and LMT200 non-intrusive styles, K-TEK LMT Series Magnetostrictive Level Transmitters allow easy change of orientation without any modification in equipment. LMT100 series comes with 22.86m probe. LMT200 series are used with KM26 magnetic level gauge. Delivering 4-20mA HART output, both series designs can be used as interface or as total level measurement.

This story is related to the following:
Electrical Equipment & Systems
Optics & Photonics
Sensors Monitors & Transducers

Search for suppliers of: Transmitters | Level Transmitters



BW Clip4 Four-Gas Portable Monitor uses non-dispersive infrared technology.

Mon, 13 Feb 2017 16:20:16 -0500

Operating on fit and forget cycle, BW Clip4 Four-Gas Portable Monitor offers simultaneous monitoring of H2S, CO, O2 and combustibles. Featuring real-time display for instant gas readings even in non-alarm conditions, unit simplifies fleet management by using Honeywell Intellidox instrument management system. Product uses infrared sensing technology.

This story is related to the following:
Sensors Monitors & Transducers

Search for suppliers of: Carbon Monoxide Monitors | Hydrogen Sulfide Monitors | Oxygen Monitors | Wireless Gas Monitors



Oakshire Cultivates Mushroom Quality with Signature Touch Metal Detector from Mettler-Toledo ...

Mon, 13 Feb 2017 15:35:49 -0500

February 9, 2017 – Oakshire Mushroom Farm is an award-winning innovator and patent holder in the mushroom industry. In business for more than 31 years, the fungi producer develops, grows and packs their own OAKSHIRE branded products as well as DOLE® mushrooms, as the exclusive licensee in North America. When Oakshire needed a new metal detector in 2015 to accommodate rising demand, they turned to Mettler-Toledo Safeline and selected a Signature Touch to maximize food safety and...

This story is related to the following:
Sensors Monitors & Transducers
Test & Measuring Instruments

Search for suppliers of: Metal Detectors | Inspection Systems



NW Series Maintenance Switches come with sheet metal housing.

Fri, 10 Feb 2017 12:29:34 -0500

Attached to electric machines for enabling safe maintenance, NW Series Maintenance Switches are lockable in zero position with up to three lockout tags. Used in single electric drive arrangement for currents ranging in 16 A to 100A, switches come with double contact and embedded controls. Consisting of three robust cam switches with round control knob, units are designed with strong blow magnets and contact opening switch.

This story is related to the following:
Electrical Equipment & Systems
Sensors Monitors & Transducers

Search for suppliers of: Switches | Safety Switches



EPS-Series Digital Pressure Sensor can be set up using pushbutton.

Thu, 09 Feb 2017 16:14:58 -0500

Capable of measuring in range from vacuum up to 5800 psig, EPS Series Digital Pressure Sensors are suitable for industrial pressure measurement and indication in gas and liquid applications. Units achieve atmospheric pressure reference at 4-pin M12 electrical connection. Featuring 1/4in. NPT male process connection, sensors come with two color digital displays and two LEDs for output status. EPS Series Sensors come in 345° rotatable stainless steel housing.

This story is related to the following:
Sensors Monitors & Transducers

Search for suppliers of: Sensors | Pressure Sensors | Digital Sensors