Last Build Date: Thu, 29 Sep 2016 03:12:24 -0400
Thu, 22 Sep 2016 08:32:16 -0400In just 2 coats, Sher-Loxane™ 800 provides high-gloss finish to bridges, water tanks, structural steel, and many other steel surfaces. Smooth finish offers long-term color and gloss retention, as well as resistance to corrosion, chemicals, and abrasion. Formulated without isocyanates, high-solids Sher-Loxane™ 800 has less than 100 g/l VOC, so it meets stringent environmental regulations. Users can apply product via spray, brush, or roller without thinning.
Tue, 20 Sep 2016 08:32:19 -0400Available on Select Coat® SL-940 Conformal Coating System, Dual-Simultaneous Programmable Pitch feature utilizes 2 applicators to coat 2 parts simultaneously. Motorized system automatically repositions applicators to match programmed pitch, eliminating set-up time normally required during changeover. With Easy Coat® software, user can program when to use one or both applicators. Applicators can also be installed with tilt and rotate options to maintain agility of complex PCB layouts.
Mon, 12 Sep 2016 08:32:15 -0400Tested and certified by RIT’s HP Indigo Over Print Varnish Performance Program, DigiGuard® Overprint Varnishes are designed for narrow web label and folding carton printing applications. Products complement DigiPrime® primers for use with HP Indigo presses. Primers and OPVs work in tandem to optimize and protect appearance of printed materials.
Mon, 12 Sep 2016 08:32:15 -0400Suitable for use with conventional inks, including UV, water-based, and solvent-based, Michem® Flex R1927 can be used on BOPP film, BOPET film, PVC film, aluminum foil, and paper substrates. This all-purpose primer, suited for flexographic, gravure, and screen printers, is optically clear and formulated for facilitated application to substrate. Along with rub and water resistance, properties include optimized ink adhesion of cyan, magenta, yellow, and black.
Mon, 29 Aug 2016 08:32:17 -0400Suited for PWB connectors and board level protection, thixotropic SpeedMask® 9-20479-B-Rev-A cures in seconds with light. This resin, designed for protection of electronic components and assemblies, provides protection from reflow or wave soldering operations and shields keep-out areas during conformal coating applications. Solvent- and silicone-free, this blue, peelable maskant offers facilitated removal and eliminates concern of ionic contamination or residual silicone.
Thu, 25 Aug 2016 08:32:12 -0400Applied at 16.0–20.0 mils dry film thickness, Series 208 Epoxoprime MVT helps protects bond line between floor topping system and concrete surface. This 100% solids, 2-component, clear epoxy primer, formulated to withstand RH up to 95% and resist alkalinity levels up to pH 14, is suited for newly poured and existing concrete slabs and can be applied as early as 10 days after newly placed concrete is installed. Following application, primer can be topcoated after 6–8 hr ambient cure.
Thu, 25 Aug 2016 08:32:12 -0400Occupying 3 x 13 ft footprint, BC40E TruTemp Finishing System utilizes 7 individual tanks, each measuring 16 x 24 x 24 in. Tanks are manufactured of heavy-weight, high-density polypropylene and polyethylene, making them virtually unbreakable. Providing Mil-Spec compliant, black oxide finishing capability with 25-minute cycle time, pre-engineered line comes complete with tank system, heaters, plumbing connections, tank lids, and chemical products.
Wed, 27 Jul 2016 08:32:06 -0400Offered in shades from light to dark, Gray Stains are suitable as neutral background color, accent color, or even dominant color. Products have true brown base color—without red or yellow undertone—that will coordinate with white paints, gray wall colors, and gray countertops and tiles. As neutral backdrop, gray stains allow homeowners to decorate with bold colors and change them out as tastes and trends change with time.
Fri, 24 Jun 2016 08:31:48 -0400Suitable for welding applications in heavy fabrication, automotive, steel storage, and agriculture industries, RP6™ Weldable Rust Preventative Fluid provides up to 6 months of indoor corrosion protection by preventing rust on ferrous metals, while not adversely impacting welding process. Oil-based fluid can be dipped, sprayed, or brushed onto ferrous metals. After applying RP6, there is no need to grind, shot blast, or chemically clean joint prior to welding.
Thu, 23 Jun 2016 08:32:34 -0400Available for glass-lined parts, accessories, and process peripherals, exterior nickel coating provides corrosion protection comparable to painting while eliminating associated contamination risk of chipping/flaking. Product bonds perfectly with base material and exhibits impact resistance, while surface preparation facilitates cleaning. Suited for pharmaceutical and fine chemical applications, system makes it possible to apply homogenous surface coating to components with complex...
Fri, 10 Jun 2016 08:40:33 -0400IR-ISE™ (Infrared - Improved Sensor Efficiency) photoconductive IR sensor coating increases signal response and durability of detectors and arrays. Developed for use with lead sulfide (PbS) and lead selenide (PbSe) sensors, this product can reduce surface reflection of incident radiation by providing environmentally rugged, single- or multi-layered thin-film coatings. Application can also seal and protect device and consequently eliminate need for glass encapsulation.
Thu, 02 Jun 2016 08:42:05 -0400Eclipse XP solar cell metallization platforms leverages XtremePrint™ technology, which self-adjusts print force in real-time to compensate for variations in cell topography. This maximizes throughput rates for single and dual print metallization processes; full stencil to wafer gasketing is possible regardless of substrate surface variances. Promoting cell efficiency, ability to print narrow lines with minimal defects enables wafer-to-wafer repeatability with minimal deviation.
Wed, 01 Jun 2016 08:45:42 -0400With true black color, Multi-Cure 9451 optimizes circuit reliability in harsh conditions, while covering markings, labeling, and other sensitive information. Single-component, 100% solids coating can be applied to variety of substrates including glass reinforced epoxy laminates, glass, and stainless steel. Formulated with secondary heat cure, product can be applied and cured at up to 5 mils thick in 1 pass for applications where shadow areas exist and becomes immediately tack-free after...
Thu, 26 May 2016 08:31:34 -0400Utilizing oxidation process using milder chemicals at lower temperature, TRU TEMP® 0.54 micron thick, satin black magnetite coating adds protection to such components as gears, sprockets, and couplings without causing any functional change. This non-polluting black oxide system, which withstands up to 100 hr of neutral salt spray (ASTM B 117) or several hundred hours of humidity (ASTM D 1748), has 25 min processing time and no EPA regulated metal content.
Tue, 24 May 2016 08:31:05 -0400Deriving its properties from polyphenylene sulfide (PPS) and polytetrafluoroethylene (PTFE), Xylan® 1300HB System is virtually unaffected by solvents to 400°F and resists attack from most acids and alkalies. Xylan 1391HB Primer provides optimized adhesion and corrosion-barrier performance when applied to properly prepared substrates, while Xylan 1311HB Topcoat delivers abrasion protection, nonwetting properties, low coefficient of friction, and chemical resistance.
Tue, 24 May 2016 08:31:05 -0400Formulated to withstand abuse typical of average kitchens, Eclipse® HB (High Build) complies with all US and European food-safety regulations and can be applied up to 2.4 mils/60 microns without any mud-cracking. This coating stays in suspension, will not settle, and sprays easily.
Mon, 23 May 2016 08:31:06 -0400Used for precise dispensing conformal coating material, preeflow® eco-SPRAY features endless piston principle and low-flow spray chamber. Volume to be nebulized can be precisely defined and exactly applied, and variation in volume rate allows spray width to be changed on-the-fly during operation. While selection of dosing needles and air shutters are included for facilitated setup, viscosity- and back-pressure independent spraying allows application of constant amount to defined area.
Thu, 19 May 2016 08:31:05 -0400Produced via chemical vapor deposition (CVD) methods, graphene film can be used as transparent conductors and in other applications. CVD graphene on copper foil has copper foil thickness of 0.035 mm, monolayer thickness from 2–3 nm, and film morphology with continuous monolayer >95%. While ultra-clean graphene on SiO2/Si Wafers transfer by PSA films, graphene on quartz glass supports transfer by hot pressing. Graphene on PET, also available, delivers maximum flexibility.
Thu, 19 May 2016 08:31:05 -0400Designed for minimally prepared sound rusted steel and previously coated surfaces, Series 118 Uni-Bond Mastic provides rust-inhibitive tie coat that can be used with acrylic and solvent-borne urethane and fluoropolymer finish coats. It is possible to apply 6–8 mils dry film thickness per coat. Single component product sprays on easily with dry-fall characteristics that minimize potential for overspray issues. Series 118 offers 200% elasticity for optimized flexibility and impact...
Tue, 10 May 2016 08:31:06 -0400Made of 70% PVDF, Fluropon® Effects Rustica Architectural Coatings contain special effects pigments that create saturated colors with antique aesthetic, including some with subtle color shift. Products can be used on aluminum extrusions, aluminum-framed windows, metal roofing systems, and composite and insulated metal wall panels. Designed to meet AAMA 620, 621, and 2605-13 standards, coatings provide color and gloss retention, withstand extreme weathering, and resist dirt, stains, and...