Subscribe: ThomasNet News - Mounting & Attaching Products
http://news.thomasnet.com/newsxml/1728
Preview: ThomasNet News - Mounting & Attaching Products

ThomasNet News - Mounting & Attaching Products



ThomasNet News is a service of ThomasNet.com



Last Build Date: Mon, 29 May 2017 23:57:44 -0400

 



Mighty-Merge® Multi-Port Connectors are cETLus Listed.

Sat, 27 May 2017 12:05:10 -0400

Used for connecting connect multiple cables through a single ¾ in. KO, Mighty-Merge® 630-NM2 Multi-Port Connectors allow contractors for quick installation and removal by squeezing fittings tabs.

This story is related to the following:
Mounting & Attaching Products

Search for suppliers of: Connectors



BMA Connectors and Adapters feature gold-plated BeCu contacts.

Sat, 27 May 2017 12:04:22 -0400

Suitable in blind mating, phased array systems, rack and panels, BMA Connectors and Adapters are operated in -65°C to +125°C temperature range. Available in military and hermetic versions made of stainless steel and brass respectively, connectors feature 1.2:1 VSWR whereas adapters offer VSWR of 1.15:1. Units provide radial and axial float in alignment applications.

This story is related to the following:
Mounting & Attaching Products

Search for suppliers of: Adapters | Connectors



Fairview Microwave Launches New Low-PIM 4.3-10 Connectors and Adapters

Fri, 26 May 2017 04:53:56 -0400

New 4.3-10 Connectors and Adapters Provide Maximum Operating Frequency of 6 GHz ALLEN, Texas - Fairview Microwave Inc., a supplier of on-demand microwave and RF components, has released 18 new 4.3-10 connectors and adapters with low-PIM performance of -166 dBc typical and a maximum operating frequency of 6 GHz. Typical applications include wireless base stations, small cells, custom cable assemblies, antenna feeder cables, mobile communications systems and distributed antenna systems (DAS)....

This story is related to the following:
Electrical Equipment & Systems
Mounting & Attaching Products

Search for suppliers of: Adapters | Connectors | Cable Connectors



Amphenol RF Expands 12G Product Line

Fri, 26 May 2017 04:53:35 -0400

Danbury, CT – Amphenol RF is pleased to offer a comprehensive line of 12G products with the release of several new connector options and the introduction of 12G optimized cable assemblies. These products are aimed to support the rapidly growing need for faster processing and more space-conscious broadcast solutions. The extended line of PCB Jacks include straight, right-angle and edge-mount configurations. These 75 ohm 12G-SDI connectors are designed to perform at frequencies up to 18...

This story is related to the following:
Electrical Equipment & Systems
Mounting & Attaching Products
Packaging Products & Equipment

Search for suppliers of: Connectors | Cable Connectors | Cable Assembly Connectors | Plugs



Spring-Loaded Connectors are housed in Nylon 46 package.

Wed, 24 May 2017 16:29:51 -0400

Available in through-hole, SMT and SMT with alignment pin versions, 858 series Spring-Loaded Connectors use high-speed precision turning. Featuring gold-plated stainless steel spring with 1.27 mm diameter, unit is suitable for variation in vertical engagement, extreme temperatures, high levels of shock and vibration applications. Unit’s spring offers 1 million operation cycles and rated for 9 amps at 10°C rise in temperature.

This story is related to the following:
Mounting & Attaching Products

Search for suppliers of: Connectors | Spring Loaded Connectors



Connectors and Adapters feature corrosion-resistant tri-metal finish.

Sat, 20 May 2017 16:04:33 -0400

Made with silver-plated center contacts, 4.3-10 Connectors and Adapters offer 6 GHz maximum operating frequency and VSWR as low as 1.08:1. Featuring low coupling torque and PIM performance of -166 dBc, units are suitable in applications such as cable assemblies, feeder cables, base stations and DAS. Products meet IP67 standards when mated.

This story is related to the following:
Mounting & Attaching Products

Search for suppliers of: Adapters | Connectors



New Product Development for the Pipe Industry

Sat, 13 May 2017 07:53:50 -0400

QCM Imports is proud to announce the design and successful testing of a new powdered metal type of gasket segment for use in the pipe industry. This gasket is similar to Wrought segments but is stronger and harder, with a superior tooth sharpness. This design was created over a long testing period to improve the quality and lead time, while providing a significant cost saving for the pipe industry. This segment will greatly improve the bottom line for this industry. QCM Imports Inc. 303 S....

This story is related to the following:
Mounting & Attaching Products

Search for suppliers of: Gaskets | Pipe Gaskets



4.3-10 Connectors and Adapters meet IEC 61169-54 standards.

Fri, 12 May 2017 16:39:21 -0400

Suitable in custom cable assemblies, feeder cables, mobile communications systems, base stations and small cells application, 4.3-10 Connectors and Adapters feature silver-plated center contacts and corrosion-resistant tri-metal finish on body and outer conductor. Designed with low coupling torque and PIM performance of -166 dBc, units are protected from dust and moisture when connected.

This story is related to the following:
Mounting & Attaching Products

Search for suppliers of: Adapters | Connectors



Onboard Systems Bell 407 Cargo Hook Kits with Surefire Option Certified by FAA

Mon, 08 May 2017 14:44:54 -0400

VANCOUVER, Wash., May 5, 2017 - Onboard Systems International, Inc., a leading provider of innovative helicopter cargo hook equipment, today announced that it has obtained FAA STC certification for several new cargo hook kits for the Bell 407 aircraft featuring their Surefire® release technology. Onboard has also submitted these systems to Transport Canada for certification. The Surefire circuit requires a purposeful, half-second press against the hook release button, guarding against...

This story is related to the following:
Material Handling & Storage
Mounting & Attaching Products

Search for suppliers of: Hooks | Lifting Hooks | Cargo Hooks



Haugen Telehandler Attachment Incorporates Straightpoint Load Cell

Sat, 06 May 2017 12:17:30 -0400

Forklift and telehandler accessories manufacturer Haugen Attachments is offering the innovative Smart Hook, an attachment that incorporates a 7.2-ton (14,000-lb.) capacity Straightpoint load cell. The 225-lb. Smart Hook can be easily attached to all kinds of telehandlers, giving end users a Crosby swivel hook that incorporates a wireless load shackle positioned at the center of a 42-inch wide and 36-inch long attachment; the attachment holds the lifting hook at 24 inches on center. Four...

This story is related to the following:
Material Handling & Storage
Mounting & Attaching Products

Search for suppliers of: Hooks | Lifting Hooks



Dual Feedback Voice Coil Positioning Stage from H2W Technologies

Sat, 06 May 2017 12:15:23 -0400

Santa Clarita, CA - The VCS20-020-CR-01-MC-F3K voice coil positioning stage has dual feedback capability. It can operate either under closed loop position control with force monitoring or closed loop force control with position monitoring. It uses H2W voice coil motor NCC20-18-020-1A to generate a continuous/peak force of 2.0 lbs [8.9 N]/6.0 lbs [26.7 N] with a total stroke length of 2.0 in [50.8 mm]. The 1-micron resolution encoder allows for precise positioning. The 3kg rated force...

This story is related to the following:
Mechanical Power Transmission
Mounting & Attaching Products

Search for suppliers of: Positioning Stages | Positioning Systems



NMO Mounts feature IP67 compliant housing.

Sat, 06 May 2017 09:11:12 -0400

Suitable for automobiles, railway cars and emergency vehicles applications, NMO Mounts enables user to upgrade GPS L1 antennas to dual (L1/L2) and triple (L1/L2/L5) band GNSS antennas. Available for TW3872 (GPS L1/L2, GLONASS G1/G2, BeiDou B1, and Galileo E1) and TW3972 (GPS L1/L2/L5, GLONASS G1/G2/G3, BeiDou B1/B2, Galileo E1/E5a+b + L-band correction) antennas, units meets RoHS and REACH standards.

This story is related to the following:
Mounting & Attaching Products

Search for suppliers of: Mounts | Antenna Mounts



Qosina Expands Its ENFitT Product Line

Fri, 05 May 2017 14:48:48 -0400

Qosina has added a number of components to its extensive ENFitT product line, including male and female connectors and caps, low dose syringes, spikes, adapters and Y connectors. ENFitT is a brand of enteral feeding connectors that meet the ISO 80369-3 standard, which was developed to improve patient safety and reduce the risk of small-bore misconnections used in liquid and gas healthcare applications. These new parts are available in various sizes and materials and complement Qosina's...

This story is related to the following:
Mounting & Attaching Products
Health, Medical, & Dental Supplies and Equipment

Search for suppliers of: Connectors | Medical Connectors | Plastic Connectors



Dril-Quip Wins Two Spotlight On New Technology Awards For Wellhead System And Connector

Fri, 05 May 2017 14:46:26 -0400

HOUSTON, May 2, 2017 - Dril-Quip, Inc. (NYSE: DRQ) was presented with two Spotlight on New Technology Awards at the 2017 Offshore Technology Conference (OTC) in Houston on May 1, 2017 for its BigBore-IIe™ Wellhead System and its DXe™ Wellhead Connector. The Spotlight on New Technology Awards showcase new and advanced technologies that are leading the industry into the future. The BigBore-IIe Wellhead System includes an integral 2 million pound high-capacity casing hanger...

This story is related to the following:
Mounting & Attaching Products
Mining, Oil Drilling, Refining Products & Equipment

Search for suppliers of: Wellhead Connectors | Wellhead Equipment



NBase-T RJ45 Connectors come with EMI spring fingers.

Tue, 02 May 2017 11:59:04 -0400

Available in single port, 4-port, 8-port, 12-port and 16-port configurations, NBase-T RJ45 connectors are suitable for 2.5GBase-T and 5GBase-T applications. Used for boosting speed from 1 to 5 Gigabits for distances up to 100 m on Cat5e and Cat6 networks, connectors use through-hole technology and withstand lead-free solder reflow temperatures up to 260°C. Units meet RoHS and UL standards.

This story is related to the following:
Electrical Equipment & Systems
Mounting & Attaching Products

Search for suppliers of: Connectors | Category 5 Connectors | Category 6 Connectors



PSM-ME-RS232 Serial Interface Isolators offer 3-way isolation.

Mon, 01 May 2017 14:45:18 -0400

Suitable for protecting RS232 devices and data transmissions by separating TX/RX data channels and the RTS/CTS control lines, PSM-ME-RS232 Serial Isolators provide maximum range of 15 m. Offering little immunity to interference, unit comes with common signal ground which is connected to grounded chassis housing. Product has an asymmetric voltage interface.

This story is related to the following:
Electrical Equipment & Systems
Electronic Components & Devices
Mounting & Attaching Products

Search for suppliers of: Signal Isolators | Isolators



CDM Electronics Now Stocks the Latest Generation of Eaton's Micro-Military Circular Connectors

Mon, 01 May 2017 10:19:07 -0400

Ruggedized Connectors Deliver Unparalleled Performance in Mission-Critical Military and Aerospace Applications Turnersville, NJ, April 26, 2017 - Announced today by CDM Electronics, a premier authorized distributor of electronic connectors and cables, is the availability of the latest generation of Eaton's Micro-Military Circular Connector Series with shell diameters as small as 0.43” (11 mm). The feature-packed series consists of fast-mating M1 (dual-start) and M5 (triple-start)...

This story is related to the following:
Electrical Equipment & Systems
Mounting & Attaching Products

Search for suppliers of: Connectors | Electric Cable Connectors



PEM® TY-D® Self-Clinching Cable Tie-Mounts and Hooks ...

Sat, 29 Apr 2017 16:56:11 -0400

PEM® TY-D® self-clinching cable tie-mounts and hooks from PennEngineering® create secure metal attachment points for mounting wires and cables to electronic chassis or enclosures. The hardware installs quickly and reliably in thin steel or aluminum panels, eliminates any need for screws or adhesives, and can be positioned permanently at specified locations and angles to promote optimized layouts. On the reverse side of hardware installation, panels remain smooth without...

This story is related to the following:
Mounting & Attaching Products

Search for suppliers of: Hooks | Mounts



Bridgeport Fittingsâ�(TM) AMC50-QI EZ-Lockâ"¢ Takes Half ...

Sat, 29 Apr 2017 16:56:02 -0400

STRATFORD, Conn. (April 27, 2017) – Bridgeport Fitting’s AMC50-QI EZ-Lock connector makes fast, secure connections employing the industry’s only double-snap type AMC connector. Contractors simply snap the connector onto the cable, squeeze the lever and set into the knockout. The lever action also allows for easy, quick removal. No tools are required with the AMC50-QI connector and the Bridgeport solution takes only half the time to install compared with traditional...

This story is related to the following:
Fluid & Gas Flow Equipment
Mounting & Attaching Products

Search for suppliers of: Connectors | Fittings



Tapered Strain Relief Solutions For Custom Products

Thu, 27 Apr 2017 14:06:13 -0400

ISC has improved upon our standard and made to order molded slip-on strain relief’s by integrating a tapered front section. Standard strain relief’s are molded with a flexible PVC material, other thermoplastic materials are available such as polyurethane and TPE’s. The addition of a taper allows for easier insertion with plastic enclosures for electronics, medical devices and other custom products. As a value added part, strain reliefs are a vital component to improving...

This story is related to the following:
Mounting & Attaching Products

Search for suppliers of: Electric Wire Grips | Molded Strain Reliefs