Last Build Date: Sun, 25 Sep 2016 02:07:02 -0400
Thu, 18 Aug 2016 08:32:13 -0400Without impacting operational performance levels or rig up time, Quiet Fleet™ reduces noise emissions during hydraulic fracturing operations. Design also allows for incorporation of 3-stage fire suppression system on each unit. Benefits from decreased noise include lessened nuisance factor, fatigue and stress reduction for onsite personnel, as well as flexibility of pad location and operational hours.
Tue, 12 Jul 2016 08:32:05 -0400When job site access constraints preclude use of cranes, telescoping boom lifts, or fork lifts, Safway Systems™ Scaffold can be configured to lift center load of up to 3,750 lb and off-center load of up to 1,875 lb. This is enabled by adding Safway System Bearer/Runner, Truss Bearer, or I-beam. For lifting and horizontal movement, configuration can include header beams and underhung trolley I-beam between them. Product meets seismic qualification tests of Class 1E equipment.
Thu, 14 Apr 2016 08:31:04 -0400CentraMax® RT1 (rotating), PI1 (push-in), and PT1 (pull-through) Centralizer Subs run in extremely tight tolerance deepwater well applications and ultra-narrow annular clearances – typically when annular clearance is <¾ in. or less than material stack. Produced from single-piece, heat-treated steel, products meet quality and performance needs of intended use in downhole applications. Sub body installation reduces centralizer's material stack to enable safe and effective passage.
Mon, 28 Mar 2016 08:31:05 -0400Added to hydraulic fracturing operations' dust management systems, UNIFRAC® DUSTSHIELD™ minimizes airborne particles generated during proppant conveyance, mixing, and pumping. This non-toxic suppression system reduces overall job/well-site exposure to respirable silica dust by up to >99%. This dust suppression technology is exclusively coated on UNIFRAC northern white sand; proppant is fully compatible with hydraulic fracturing fluids.
Fri, 12 Feb 2016 08:31:04 -0400Designed specifically for enhancing recovery of oil and gas in low-temperature reservoirs, InnoProp® PLT delivers optimized bond strength and crush resistance. Polyurethane-based formula bonds without use of activator down to 70°F bottom-hole static temperature. Product significantly reduces proppant flowback and provides increased conducitivty, which optimizes hydrocarbon recovery. In addition, InnoProp PLT has ability to re-bond, helping to ensure continued performance under cyclic...
Tue, 02 Feb 2016 08:31:04 -0400Equipped with anti-slip silicone strap that comes pre-adjusted to fit hard hat, Model 56220 has lamp with 45° tilt for varied beam direction. Lamp can be used in spotlight mode with 150 lumens and 6 run hours, or floodlight mode with 50 lumens and 10 run hours. Headlamp is also water- and impact-resistant. Other available products include 215 lumen Side Focus Flashlight, 36 lumen Penlight, and Clip Light with 50-lumen low mode and 150-lumen high mode.
Tue, 27 Oct 2015 08:31:04 -0400Powered by 90 kW electric motor, Model MDR700 features LM™ 700 feed frame delivering 81.4 kN of pullback. Sophisticated articulations with 3 turning points enable users to drill 270° horizontally and vertically up to vertically down. Mobility is optimized with Manitou diesel-powered 4-wheel drive carrier which offers 3 steering modes: 4-wheel, 2-wheel, and crab-like movement. Able to move at up to 6 mph, rig has fully hydraulic positioning system and handheld remote controller.
Tue, 06 Oct 2015 08:31:05 -0400With optimized conductivity and strength, InnoProp® Python RCS (Resin Coated Sand) prevents proppant flowback to well-bore. Use of U.S. Silica White® sand promotes quality and consistency, and product does not sacrifice quality for performance. Available in all mesh sizes utilized in frac designs, this proppant is recommended in all formations with net closure stresses up to 10,000 psi.
Tue, 08 Sep 2015 08:31:05 -0400Featuring 5 operating modes, explosion proof Model EXP-LED-HL-MX2 uses 2 high-intensity CREE LEDs mounted within impact-resistant housing and is powered by 3 AAA batteries. Full power spotlight produces 115 lm beam capable of reaching over 250 ft, while full power floodlight produces 120 lm with 5.25 hr runtime. Spot and flood light combination produces 160 lm with 3.5 hr runtime. With elastic head strap and adjustable rubber strap, users can wear lamp directly on head or on hard hat.
Fri, 19 Jun 2015 08:31:05 -0400Comprised of polished bore receptacle, liner-top packer, and rotational hanger, IntegraLine™ is engineered for critical environments, such as ultra deepwater, extended-reach, and sour-gas wells. Packer features swage sealing technology that forms anti-extrusion, gas-tight barrier between outer diameter of packer body and inner diameter of host casing. Configuration minimizes equipment failures that may threaten well integrity, allowing clients to achieve total depth efficiently.
Mon, 08 Jun 2015 08:31:04 -0400Offered in 4 standardized packages to achieve LNG production capacity of 1.0, 2.0, 4.0, and 6.0 mmscd, Playwell Micro LNG Solution features compact, skid-mounted structure with standardized key equipment that includes Ariel compressor and Caterpillar engine. For liquefaction processes, solution offers SMR, N2 expansion, and PCMR processes for production efficiency. Intelligent remote control system enables real-time data acquisition via mobile phones and other terminals.
Thu, 21 May 2015 08:31:05 -0400Designed to monitor Packers Plus multi-stage completion systems, ePLUS™ Retina™ Monitoring System lets users observe downhole events and their effects on reservoir. Self-contained unit offers clear indications of downhole operations in real-time, enabling operators to make on-the-fly operational adjustments. In addition, system optimizes reservoir stimulation and remedial operations, delivers detailed recorded data for future use, and provides redundancy for all measurements.
Tue, 21 Apr 2015 08:31:05 -0400Capable of drilling to depths up to 250 ft when used with 4.75 in. casing, LS™250 MiniSonic™ has wide 600 mm rubber tracks that provide low ground pressure of 4 psi. Interlocked rotation barrier automatically slows head rotation when barrier is open, while articulated mast and wiggle tail enable mast to be positioned precisely over hole. In addition, rod presenter allows rod and casing to be loaded horizontally, with actuator that then presents rod and casing vertically to...
Fri, 20 Mar 2015 08:31:06 -0400Built on direct drive platform, SWT-7.0-154 offshore gearless wind turbine delivers 7 megawatt (MW) of power. Strength of permanent magnets and generator segments in permanent magnet generator promote yield harvest, while converter and transformer are designed for maximum electrical output. Designed to lower electricity generation expenditure, turbine features structural design with rated lifetime of 25 years.
Wed, 23 Jul 2014 08:31:25 -0400Ranging in center frequency up to 2,360 MHz, band pass filters are part of LC filter series and target Oil Field Exploration and Mining market. Mounting features help withstand harsh environments, including temperature swings resulting from being exposed to normal outdoor conditions where oil exploration occurs. Offering bandwidths in excess of 25% of center frequency, products can be mounted via SMT packaging or other custom configurations, including connectorized or through hole.
Thu, 08 May 2014 08:30:30 -0400Designed to increase productivity in reverse circulation (RC) drilling and conventional down-the-hole (DTH) drilling, BLH™ series includes valved BLH5 and BLH3 hammers as well as valve-less BLH1. Bits are available to support all BLH hammers. BLH5 delivers balanced operation with minimized vibration as well as optimized productivity in various ground conditions, and BLH3 adds steel valve system. With minimal moving parts, BLH1 achieves balance between simplicity and performance.
Mon, 31 Mar 2014 08:31:25 -0400For surface mining and trenching machines, no-weld QC42 Quick Change Block System cuts time needed to change block from machine base from 60–90 min down to 10–15 min. System features 1070 spring steel retainer that provides added safety feature to keep unit together when not fully engaged from tapered press fit. Rubber bumper stops keep block from over-locking, while hardfaced block face ensures optimal conical rotation and minimizes wear.
Tue, 11 Mar 2014 08:30:34 -0400Combining 110 kW power pack, 128 kN feed frame, rotation unit, foot clamp, and controller, Model LM110 provides high pullback force and fast rod-handling rate for maximum drilling productivity. Components can be interchanged to adapt to customer requirements as their needs change. For optimized safety, hands-free making or breaking of joints, and semi-autonomous drilling, Model LM110 can be outfitted with rod handler and Drill Control Interface™.
Tue, 08 Oct 2013 08:30:52 -0400Designed for suspension operations in deepwater markets, ISO 14310 V0-rated STORMLOCK includes 10,000 psi ball valve qualified in accordance with ISO 28281. Although plug is able to support up to 300 tons of pipe, it does not require weight below so it can be set shallow, deep, and even in horizontal sections and in non-storm applications. Plug can be repositioned and reset any number of times if well conditions present challenges.
Tue, 17 Sep 2013 08:30:29 -0400By mixing material close to gun, ProMix PD2K minimizes flush zone size. This consequently enables use of less paint while also accelerating color changes. Also, amount of mixed material in system supports short pot life materials. Positive displacement technology produces mix ratios within 1% accuracy and lends to consistent pump performance. Also compatible with acid-based materials, proportioner can be equipped with 2 or 4 dosing pumps and manage up to 30 colors and 4 catalysts.