Subscribe: ThomasNet News - Mechanical Power Transmission
http://news.thomasnet.com/newsxml/1620
Preview: ThomasNet News - Mechanical Power Transmission

ThomasNet News - Mechanical Power Transmission



ThomasNet News is a service of ThomasNet.com



Last Build Date: Tue, 23 May 2017 20:08:56 -0400

 



LMS-180 Linear Stage features linear encoder with sine/cosine output.

Mon, 22 May 2017 13:36:37 -0400

Available with travel ranges from 6 to 20 in., LMS-180 Linear Stage offers smooth motion with 15 nm resolution and repeatability down to 0.05 microns. Unit delivers 500 mm/sec maximum velocity when driven with SMC Hydra closed-loop motion controller. Equipped with ironless electromagnetic linear motor, unit’s recirculating ball bearings provide 250N load capacity. Product also comes with ballscrew drive and rotary stepper and servo motor options.

This story is related to the following:
Material Handling & Storage
Mechanical Power Transmission

Search for suppliers of: Stages | Linear Motor Driven Stages



Custom Sinochron® Synchronous Motors and Drives Can Operate Without an Encoder

Mon, 22 May 2017 13:09:11 -0400

The SINOCHRON® Motor design offers advantages in continuous duty applications. The efficiency is also better in partially loaded duty cycles, when compared to standard asynchronous motors. Drive units are virtually loss-free in no-load operation. This motor design offers advantages in powering conveying equipment; escalators, spooling machines, compressors and traction drive units amongst others. By substituting existing line powered three-phase drive units, energy savings of 20 to 35...

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Motors | Electric Motors



Visit Empower RF Systems at Booth 1007 for Remote Live Demonstrations

Fri, 19 May 2017 13:16:46 -0400

Empower RF Systems is conducting remote live demonstrations of our broadband, high power 1KW 1 to 3 GHz amplifier, Booth 1007. The amplifier will be housed in Los Angeles and viewed in the Hawaii exhibit venue with live streaming video while remotely controlling the amplifier from the exhibit floor through a standard web browser. What you will see is a demonstration of remote operation of the Empower 2170 1KW RF amplifier in a test setup that includes a signal generator, spectrum analyzer,...

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Amplifiers



IMS 2017 Technical Presentation �Multi-use Interoperable RF ...

Fri, 19 May 2017 13:16:33 -0400

On Tuesday June 6th Empower RF’s CTO , Paulo Correa, will be presenting this topic to an audience of IMS attendees at the Exhibitor Workshop 1pm to 3pm, Room 318/319 of the Hawai’i Convention Center. Abstract The RF system amplifier has not evolved in any significant way since the inclusion of the microcontroller twenty years ago. That’s a remarkable statement given the advancements seen in virtually every other application of RF products and test systems. In this...

This story is related to the following:
Electronic Components & Devices
Mechanical Power Transmission

Search for suppliers of: Amplifiers | Power Amplifiers | RF Amplifiers



Pasternack to Exhibit at the 2017 IEEE MTT-S International Microwave Symposium in Honolulu

Fri, 19 May 2017 13:13:04 -0400

Pasternack Engineers Will be at Booth #514 on June 4th-9th in the Hawaii Convention Center IRVINE, Calif. - Pasternack, a leading provider of RF, microwave and millimeter wave products, has announced that they will be exhibiting at this year’s IEEE International Microwave Symposium (IMS 2017) in Honolulu, Hawaii from June 4th to June 9th at the Hawaii Convention Center. This year at IMS 2017, Pasternack’s team of engineers will be in booth #514 promoting hundreds of newly...

This story is related to the following:
Communication Systems & Equipment
Electronic Components & Devices
Mechanical Power Transmission

Search for suppliers of: Amplifiers | Waveguide Bends | Frequency Multipliers | Waveguides



Poly Chain® ADVâ"¢ Transmission Belt reduces ...

Thu, 18 May 2017 10:26:02 -0400

Manufactured using cutting-edge carbon fiber technology and tooth jacket material, Poly Chain® ADV™ Synchronous Power Transmission Belt delivers less component wear than multi-strand v-belt drives. Offering 15% increased capacity over Poly Chain® GT® Carbon™ belts, product is suitable for recreational vehicles, industrial dough mixers, metal stamping equipment and industrial automation applications.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Industrial Power Transmission Belts



Commercial Series V-Twin Engines work on electronic fuel injection method.

Mon, 15 May 2017 16:53:54 -0400

Electronic Fuel Injection option is enabled on Commercial Series V-Twin Engines 2WD and one 4WD Prestige models. Reducing up to 15% fuel costs compared to carbureted engine, Commercial Series V-Twin Engines offer Free Floating™ mower deck, Quick Hitch™ deck removal system, power steering, tilt wheel and hydraulic attachment lift. Units are equipped with Automatic Controlled Traction™, differential lock and SCS™.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Engines | Tractor Engines



IDEC Releases Line of Stepper Motion Control Products

Sat, 13 May 2017 16:06:07 -0400

AMCI by IDEC motion control products integrate closely with IDEC PLCs to provide a simple yet powerful way to control single- and multi-axis motion. IDEC Corporation, Sunnyvale, CA, May 9, 2017 - IDEC Corporation introduces a line of motion control stepper products in conjunction with Advanced Micro Controls Inc. (AMCI), an established developer of motion control systems. This AMCI by IDEC product line includes controllers, stepper motors, an integrated controller/drive, an integrated...

This story is related to the following:
Controls & Controllers
Mechanical Power Transmission

Search for suppliers of: Controllers | Motion Controllers | Stepping Motors



Matco-Norca Offers Standard & Heavy-Duty No Hub Couplings for Hubless Cast Iron Pipe ...

Sat, 13 May 2017 07:54:57 -0400

Brewster, NY, May 10, 2017 - Matco-Norca offers no hub couplings in both standard and heavy-duty versions for use in joining hubless cast iron pipe applications. Both Standard and Heavy-Duty Couplings provide ease of installation and permanent sealing solutions as well as proper pipe alignment. Matco-Norca 452 Series Standard No Hub Couplings are UPC and IPC approved and conform to the latest editions of ASTM C1277/C564. They are available in sizes 1-1/2” through 10”. Sizes...

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Couplings



Sigma-7 AC Servo Drives come with mechatrolink3 communication.

Fri, 12 May 2017 16:38:13 -0400

Designed to operate with 20% less heat generation, Sigma-7 AC Servo Drives are available in 200V and 400V Series models. Units cover power range from 50W to 15kW. Offering continuous and peak torque of 95Nm and 224Nm, drives ensure resolution of 16 million pulses per revolution. Providing ripple compensation, units feature speed loop bandwidth of 3.1kHz. Meeting SIL 3 and PL-e standards, drive’s housing design supports side-by-side installation of amplifiers.

This story is related to the following:
Controls & Controllers
Mechanical Power Transmission

Search for suppliers of: Drives | Servo Drives



Wilden Pump Distributor Introduces Custom Parts Kits for Diaphragm Pump Line

Wed, 10 May 2017 12:52:48 -0400

Reliable Equipment Sales Stocks Repair Kits with Genuine Wilden Parts Wolcott, CT: Pump and process equipment distributor Reliable Equipment Sales, Wolcott, CT, (Reliable-Equipment.com), has introduced custom parts kits for repairing Wilden air-operated, double diaphragm pumps. Featuring only genuine, Wilden replacement parts, the rebuild kits include the parts required for both the air side and liquid side of the pump such as diaphragms, shafts, glyd rings, pilot sleeves, valve balls, air...

This story is related to the following:
Fluid & Gas Flow Equipment
Mechanical Power Transmission

Search for suppliers of: Pumping Systems | Pump Shafts | Pump Valves



XYZ Piezo Stages for Exceptional 3D Positioning Accuracy

Mon, 08 May 2017 14:44:04 -0400

Travels to 120 μm x 120 μm x 12 μm 40 x 40 mm square clear aperture Patent-pending parallel-kinematic design provides unmatched geometric performance Superior positioning resolution and linearity with direct-metrology capacitive sensor Aerotech’s QNP3 series XYZ piezo positioning stages combine sub-nanometer resolution, high dynamics, and excellent geometric performance in a compact three-degree-of-freedom (DoF) package. They come with a 40 mm x 40 mm clear aperture with...

This story is related to the following:
Material Handling & Storage
Mechanical Power Transmission

Search for suppliers of: Positioning Stages | X-Y Stages | Piezoelectric Stages



Dual Feedback Voice Coil Positioning Stage from H2W Technologies

Sat, 06 May 2017 12:15:23 -0400

Santa Clarita, CA - The VCS20-020-CR-01-MC-F3K voice coil positioning stage has dual feedback capability. It can operate either under closed loop position control with force monitoring or closed loop force control with position monitoring. It uses H2W voice coil motor NCC20-18-020-1A to generate a continuous/peak force of 2.0 lbs [8.9 N]/6.0 lbs [26.7 N] with a total stroke length of 2.0 in [50.8 mm]. The 1-micron resolution encoder allows for precise positioning. The 3kg rated force...

This story is related to the following:
Mechanical Power Transmission
Mounting & Attaching Products

Search for suppliers of: Positioning Stages | Positioning Systems



RC Series Power Take-Offs feature self-adjusting dry clutches.

Fri, 05 May 2017 12:15:26 -0400

Suitable for construction, mining, snow removal, forestry, agriculture and recycling, Power Take-Offs is available in RC214 and RC314 models. Designed with two and three friction plates, RC214 provides maximum input torque of 2,195 lb-ft organic and 2,748 sintered whereas RC314 model with 3,297 lb-ft and 4,125 respectively. Featuring advanced controlled system for soft-starting high-inertia loads, units use 240–300 psi of engagement pressure.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Power Take-Offs



Secure Easy Selection and More Uptime with New One-Type-Fits-All Valve Actuator

Wed, 03 May 2017 12:21:09 -0400

Things to consider when choosing an actuator: 1. How many types of actuators would I like in my plant? Making sure that your time is spent as efficient as possible, we know that easy selection is crucial in hygienic industries. To meet these demands, we present the new Alfa Laval Unique DV-ST UltraPure Actuator that fits the complete range of our standard diaphragm valves. It simplifies inventory management and makes the specification process quick, easy and secure. Regardless of the...

This story is related to the following:
Fluid & Gas Flow Equipment
Mechanical Power Transmission

Search for suppliers of: Actuators | Valve Actuators



Schaeffler Showcases Comprehensive Portfolio of Technological Innovations for the Oil & ...

Wed, 03 May 2017 12:11:55 -0400

Schaeffler presents an expansive lineup of state-of-the-art bearing and technology solutions - headlined by its innovative frac pump bearings, mud motor bearings and sealed sheave bearings - engineered to help the oil & gas industry reduce costs and minimize downtime FORT MILL, S.C., May 1, 2017 - Global industrial supplier Schaeffler is exhibiting a comprehensive portfolio of innovations and solutions for the oil & gas industry at the 2017 Offshore Technology Conference (OTC),...

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Bearing Assemblies | Electric Motor Bearings | Pump Bearings



BXR-LE Brakes offer maximum speed of 6000 RPM.

Tue, 02 May 2017 11:57:50 -0400

Suitable for robotic arm joints, CNC machine centers, direct drive servo motors and locking sensor alignment applications, BXR-LE Brakes deliver static friction torque ranging from 0.06 Nm - 3.20 Nm. Operated in -20°C - 60°C temperature range, units feature lightweight and slim design. Equipped with voltage controller, brake’s power consumption is reduced to 7 VDC after split second for 24VDC brake actuation.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Brakes | Machine Tool Brakes



Lifetime Lubrication Ensures Smooth Operating Zero-Max Right Angle Gear Drives - They Feature ...

Mon, 01 May 2017 10:18:29 -0400

Plymouth, Minnesota: Lifetime lubrication in Zero-Max “Crown” gear drives assures motion system designers of a smooth operating, quiet right angle gear drive that needs no maintenance. These drives are designed for economical transfer of speed or power. Lubricated for life with Beacon 325 premium grade grease, Zero-Max Crown drives feature heat treated AGMA Class 10 spiral bevel gears. This combination of bearing design and lubrication formulation ensures long-term, maintenance...

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Gear Drives | Gearboxes



A-62x PIglide Series Air Bearings eliminate breakaway stiction.

Mon, 01 May 2017 10:04:49 -0400

Suitable for inspection, metrology, calibration, and scanning applications, A-62x PIglide RM Rotary Air Bearing Stages are equipped with slotless torque motors and optical encoders. Delivering velocity of up to 2500 rpm with up to ±50nm motion errors and axial runout to ±50nm, units provide point-to-point indexing or constant velocity scanning. Offering tilt error of 0.3arc-sec, positioners come with maximum payload of 13 to 425 kg.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Bearings | Air Bearings | Linear Motor Driven Stages



13X Single-Drive Axles can be configured using hydraulic disc brakes.

Mon, 01 May 2017 10:04:18 -0400

Weighing 59 lb, 13X Single-Drive Axle is used in applications such as pick-up and delivery, beverage, utility, school bus, construction and ambulance. Axles are available in variety of ratios from 3.90 to 6.50 and between 17,000 and 21,000 lb gross axle weight ratings.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Axles | Truck Axles