Last Build Date: Fri, 28 Oct 2016 00:35:51 -0400
Wed, 26 Oct 2016 08:32:21 -0400Featuring professional-grade charger, Stormcell™ 442 Series Pump System provides 12 volts battery backup. Designed in 10 and 25 amp models, unit provides remote monitoring using NightEye™ app wireless technology. Device is energy efficient for longer run-times.
Mon, 24 Oct 2016 08:32:16 -0400Offering alternative for pharmaceutical production processes and medical packaging, Kalrez® LS222 can be used in aerosol rings, infusion hangers, micro valves, needle covers, plungers, and serum stoppers. Product is best positioned for O-rings and custom parts with outer diameter up to 2 in. Part resists over 1,800 different chemicals, while offering high temperature stability of PTFE (327°C). Long-term performance can mean less frequent seal changes, repairs, and inspections.
Mon, 24 Oct 2016 08:32:15 -0400Generating pneumatic pressures up to 21MPa, portable Pneumatic Test Pump requires no nitrogen bottle or external pressure supplies. Suitable for generating high pressure in the field to devices under test (DUTs), 700HPPK reaches full scale pressure in 20 seconds into a 30 cm3volume. Adjustable control knobs enable fine pressure adjustments up to a reading of 0.05%. In-line filter and desiccant systems protect unit against con¬tamination from the DUT.
Mon, 24 Oct 2016 08:32:15 -0400Designed for use in demanding high-volume industrial markets, Kalrez® CP222 Perfluoroelastomer Part is best positioned for O-rings and custom parts with outer diameter up to 2 in. Product resists over 1,800 different chemicals, while offering high temperature stability of PTFE (327°C). Long-term performance can mean less frequent seal changes, repairs, and inspections. Standard offering is for more than 10,000 parts per order, with bulk packaging of 500 pieces per bag.
Fri, 21 Oct 2016 09:46:16 -0400With weight of 79 g, 1.03 in. dia, height profile of <2 in., PRD3HP series reduces inlet pressure of up to 3,000 psi down to outlet pressure as low as 0.5 psi. GCP series gas piercing fitting connects gas cylinder to PRD3HP and pierces cylinder seal. In addition to analytical instruments, areas of use include toxic gas detection equipment, aerospace devices, medical equipment, food and beverage dispensing equipment, and agricultural research instruments.
Thu, 20 Oct 2016 08:32:21 -0400Constructed of 316 stainless steel, 4QSS liquid-tight fittings suit food, beverage, and pharmaceutical industry applications. These UL-Listed fittings, which securely connect flexible metallic electrical conduit, completely seal off liquids, vapors, and solids. With pronounced threads, nickel-plated ferrule maximizes surface contact to ensure pull-out protection and prevention of tight bend conduit pop-out. Trade sizes range from 3/8–2 in., and body designs include straight, 45°, and...
Tue, 18 Oct 2016 08:32:22 -0400Made of injection-molded polycarbonate to provide chemical resistance, Transparent Gate Valve Lockout Device protects workers from hazardous energy and prevents exposure to hazardous chemicals. Specially formulated transparent material allows for both visual confirmation of correct valve position and hazardous leak identification while in locked out state. Available in 5 different sizes, device accepts shackles up to 3/8 in. in diameter and can handle temperatures from -40 to 250°F.
Mon, 17 Oct 2016 08:32:15 -0400With ULPA testing up to 99.9999% efficiency and consistent test results, 8130A is suited for QC testing of particulate respirator filters, disposable filtering face pieces, and diverse filter media. Features include customizable, automated testing sequences; salt and oil measurement capability that ensures compliance with multiple standards; and user-serviceable photometers. Operation supports stand-alone use as well as automated, high-volume production line integration.
Mon, 17 Oct 2016 08:32:15 -0400Designed for use with Sundyne integrally geared pumps and compressors, SundSEAL minimizes leakage and increases Mean-time Between Repair (MTBR). This output shaft seal creates barrier between process seals and gearbox interior that can withstand pressures up to 275 psi to keep process fluid out of gearbox. Along with reverse pressure capability, seal offers straightforward retrofit method that facilitates upgrades on existing units.
Mon, 17 Oct 2016 08:32:15 -0400Offered with option of BSP and NPT threads, Series 6000 features 1-piece metal collet that provides optimized gripping strength. Units are 100% electrolytic nickel-plated and allow frequent connections/disconnections that can be done with one hand. With Teflon ring on male thread ensuring perfect seal between 2 threads, Sprint® and Pro-fit® models provide reliability, even when used with non-flat surfaces. Fittings come in tube external diameters ranging from 3–16 mm and 1/8–½...
Fri, 14 Oct 2016 08:32:16 -0400Manufactured in CF8M (316 SS), pulling elbows are designed for use with rigid conduit. These products, which make wiring pulls at 90° bends in conduit system, can assist in instances of sharp bends and allow straight pull in either direction. Each pulling elbow comes with Type 316 SS cover, neoprene gasket, and Type 316 SS screws.
Fri, 14 Oct 2016 08:32:16 -0400Atomizing fluid and spraying at right angle to nozzle orientation, ¼ NPT No Drip Internal Mix Spray Nozzle places spray precisely where it is needed when mounting and work areas are limited. When compressed air supply is shut off, nozzle positively seals off flow of liquid, eliminating possibility of drips and conserving liquid. Fully adjustable unit is available in 5 patterns: narrow angle round, wide angle round, flat fan, deflected flat fan, and 360° hollow circular.
Thu, 13 Oct 2016 08:32:18 -0400Available in 1 1/2" and 2" sizes, Viega PEX Press 45-degree elbows feature Viega's patented Smart ConnectR feature, which allows water to flow past an unpressed fitting. Suitable for use in commercial applications, Viega PEX Press is molded from Radel-RR, a superior plastic material. Factory assembled with attached stainless steel sleeves with three view holes, 45-degree elbows can be used with all Viega tubing, including: ViegaPEXTM, ViegaPEX Ultra, and Viega FostaPEXR.
Tue, 11 Oct 2016 08:32:11 -0400Intended for general purpose fluid transfer applications, SP400FO Tubing Pumps offer benefits of peristaltic pumps, including self-priming design, dry running, and limited fluid contact. Users can select from range of long-life tubing options for best fluid compatibility. Rated for continuous duty, pumps support wide range of plant applications.
Tue, 11 Oct 2016 08:32:11 -0400Designed to minimize flow losses and hydraulic shocks in pumping system, 1 in. and 1 ¼ in. Model 80DI VFD features ductile iron body with standard epoxy coating to support deep set pumps. Stainless steel guided poppet system ensures that valve automatically adjusts noiselessly from high to very low flow rates. Radiuses of valve seat allow self-cleaning one point swiping action by radius-edged custom molded rubber seal disc. All internal parts are made from corrosion-resistant materials.
Fri, 07 Oct 2016 08:32:21 -0400Offering an easy-access gear box design, FDS Twin Screw Pump enables safe and easy maintenance. Flexible to process and CIP with the same pump, solid shafts and large, stable bearings in a cooling oil bath ensure long service life.
Fri, 07 Oct 2016 08:32:21 -0400Suitable for food and beverage market, T&B’s 45- and 90-degree elbows and 12-inch nipples, comes in both Type 304 and Type 316 stainless steel. Resistant to extreme corrosion and chemicals, Type 304 stainless steel has five times the service life and Type 316 stainless steel eight times the service life. Presented with National Pipe Thread for easy installation, stainless steel conduit and fittings are durable, sturdy, easy to install and low in maintenance.
Thu, 06 Oct 2016 08:32:19 -0400Featuring lead-free brass construction, ASCO 210 Series and 262/263 Series Valves comply with Federal Safe Drinking Water Act requirements. Units feature NBR and EPDM elastomer options and are available in pipe sizes from 1/8–1 in. Coil electrical connection options include: conduit (NEMA 4X), DIN coil, and open-frame spade. Offered in 0 psi minimum pressure differential option as well as 5 psi minimum differential models, valves are suited for dishwashing equipment and general plumbing...
Thu, 06 Oct 2016 08:32:19 -0400Designed specifically to protect and route high-temperature cables, Harnessflex® TempGuard™ Conduit and Fittings provide integrated system for engine wiring in temperatures up to 392°F. Products are made from specially formulated polyamide and co-polyester materials. Range includes HTC08-HTC20 conduit, with respective T- and Y-Piece fittings, straight and elbow joiners, and back shells for AMP, Bosch, Deutsch, and FCI connectors.
Mon, 03 Oct 2016 09:01:35 -0400Intended for food processing industry, MasoSine Certa™ Pump meets highest sanitary standards including 3A and EHEDG Type EL Class I. Unit handles up to 8 million cPs with low shear and zero pulsation. In addition, pump is fully drainable, CIPable, and requires up to 50% less power than other pumps with viscous fluids.