Subscribe: ThomasNet News - Fasteners & Hardware
http://news.thomasnet.com/newsxml/920
Preview: ThomasNet News - Fasteners & Hardware

ThomasNet News - Fasteners & Hardware



ThomasNet News is a service of ThomasNet.com



Last Build Date: Mon, 20 Feb 2017 01:10:28 -0500

 



Aluminum Torque Limiting Knurled Knobs with Steel Threaded Stud Available from J.W. WINCO

Thu, 16 Feb 2017 15:06:19 -0500

NEW BERLIN, WI - J.W. Winco, Inc., a leading supplier of standard industrial machine components, announced it now offers GN 3663 Aluminum Torque Limiting Knurled Knobs with Steel Threaded Stud. The RoHS compliant torque limiting knobs are used when manually applied torque is to be limited. When turned clockwise, the torque mechanical system of the knurled knob triggers an "over-engagement" as soon as the specified torque is reached. When tightening, this insures that maximum...

This story is related to the following:
Fasteners & Hardware

Search for suppliers of: Knobs | Aluminum Knobs



Kwikset Convertâ"¢ Wins 2017 Techhome Mark of Excellence Award

Wed, 15 Feb 2017 14:01:14 -0500

Kwikset’s New Z-Wave™ Smart Lock Conversion Kit Honored as Security Product of the Year LAKE FOREST, CA (February 13, 2017) – Kwikset brand of Spectrum Brands, Inc. – Hardware and Home Improvement Division, the leader in residential security, announces that its Kwikset Convert™ lock has been awarded a 2017 TechHome Mark of Excellence Award as Security Product of the Year. Presented by the Consumer Technology Association (CTA)™, the Mark of Excellence...

This story is related to the following:
Fasteners & Hardware

Search for suppliers of: Locks



CDSH Series Rectangular Inserts eliminate need for special wire preparation.

Mon, 13 Feb 2017 16:23:46 -0500

Available in 9, 18, 27, 42, 54 and 84 pole configuration, CDSH Series SQUICH Rectangular Inserts offer resistance against strong vibrations. Enabling quick identification of wired and non-wired terminals, connectors can be used with wires up to 2.5 mm^2. Featuring actuator buttons, units are rated to 10 A current and 400 V.

This story is related to the following:
Electrical Equipment & Systems
Fasteners & Hardware
Mounting & Attaching Products

Search for suppliers of: Connectors | High Density Connectors | Inserts



Crest-to-Crest Wave Spring Series are suitable for computer and robotics industries.

Mon, 13 Feb 2017 16:10:40 -0500

Available in C (imperial) and CM (metric) Series, Crest-to-Crest Wave Spring Series are designed in 0.188 in. and 5 mm diameters. Used in medical, computer and robotics industries, spring can be custom designed for user application up to 0.157 in. or 4 mm diameter.

This story is related to the following:
Fasteners & Hardware

Search for suppliers of: Springs | Wave Springs



M&S Centerless Grinding Manufacturers Precision Firing Pins for the DOD

Thu, 09 Feb 2017 16:16:32 -0500

In preparation for a rapid deployment of troops for a broad-based military engagement a primary DOD supplier was contracted to manufacture firing pins for machine guns. The features of the pins were complex and the time frame for completion was extremely tight. Material: Tool Steel HT 50-55Rc. Part geometry was fairly complex - but the project HAD to have highest priority - grinding needed to begin within the hour that the parts were received. The project was evaluated for scope of work,...

This story is related to the following:
Fasteners & Hardware

Search for suppliers of: Pins



Mechanical Pin Splice

Thu, 09 Feb 2017 04:46:26 -0500

“Ideal for quick timing belt installation” Not for Drive Belts Urethane Timing Belt Pitches • T5, T10, T20, AT5, AT10, AT20 • L, H, XH • HTD: 5M, 8M, 14M • STD: 5M, 8M, 14M Available Belt Widths Varies depending on the belt pitch. Please contact our sales department. Benefits • Easily installed by hands and pliers in seconds. • Increases profitability by reducing machine downtime during belt replacement. OEM’s save money in machine design...

This story is related to the following:
Fasteners & Hardware

Search for suppliers of: Belt Splicers | Splicers



PEM® Type SLâ"¢ Self-Clinching Steel Locknuts for ...

Fri, 03 Feb 2017 16:46:34 -0500

PEM® Type SL™ self-clinching steel locknuts from PennEngineering® integrate a unique TRI-DENT® locking feature to hold mating screws tight over time by providing sufficient torsional resistance to withstand vibration, thermal cycling, and other disruptive forces that could loosen the screws in service. These prevailing torque locknuts, which meet 3 cycle locking performance to effectively “self-lock” the threads of mating screws, further will allow for the...

This story is related to the following:
Fasteners & Hardware

Search for suppliers of: Self-Clinching Nuts | Self-Locking Nuts



806 Series Spring Loaded Pins come with closed flat top.

Fri, 03 Feb 2017 16:43:19 -0500

Available in 806-22-001-30-0XX191 and 806-22-001-10-00X191 models, 806 series Spring Loaded Pins feature four finger designs for easy removal of caps. 806-22-001-30-0XX191 series are available in nine surface mount options using 0900-X and 0907-X spring pins. 806-22-001-10-00X191 are designed in four through-hole style springs 0906-X. Rated to 2 A continuous current, product comes in 13 in. reels with surface mount style on 16 mm wide tape.

This story is related to the following:
Fasteners & Hardware

Search for suppliers of: Pins | Spring Pins



18/3-22/2 AWM2661 Power Cords are 0.26 in. thin.

Mon, 30 Jan 2017 17:17:09 -0500

Available in bulk, blunt-cut to length, stripped one or both ends, with white, black, or clear braid outer jacket, 18/3-22/2 AWM2661 Power Cords utilize three 18 gauge power conductors and two 22 gauge control wires. 300-volt power cord comes in 0.26 in. thickness with 18 gauge control wires.

This story is related to the following:
Fasteners & Hardware

Search for suppliers of: Cord | Power Cords



TopLineâ�(TM)s Micro-coil Springs (MSC) for CCGAs in Harsh Environments Featured at ...

Sat, 28 Jan 2017 06:45:44 -0500

Absorbs Extreme Shock CCGA and BGA Components; Novel Interconnect Innovation Milledgeville, Georgia, USA – TopLine, a leading designer and manufacturer of electronic components and packaging solutions for PCB assemblies, will exhibit its MSC Series of Micro-coil springs, a novel interconnect for CCGA (Ceramic Column Grid Array) IC packages for harsh environments. In tests using daisy chain test vehicles, Micro-coil springs absorbed extreme shock of up to 50,000g before failing....

This story is related to the following:
Fasteners & Hardware

Search for suppliers of: Springs | Coil Springs



FastSetâ"¢ King Ream Pin Kit allows grease to permeate high-wear areas.

Fri, 27 Jan 2017 16:36:27 -0500

FastSet™ King Pin Ream offers 45 no-ream kits and provides fleets with faster solution for pin replacement. King pin bushings are not reamed after installation into steering knuckle. Eliminating need for reamers, special tools, and presses when replacing kingpins, pins feature groove design and are used in axle applications.

This story is related to the following:
Fasteners & Hardware

Search for suppliers of: Kits | Pins



Press-Fit PCB Pins offer high mechanical strength.

Tue, 24 Jan 2017 17:27:28 -0500

Suitable for solderless PCB terminations on to board, Press-Fit PCB Pins feature multi-faceted geometries. Available in square and hexagon press-fit shapes with diameters ranging in 0.040 in. to 0.80 in., pins allow remainder of the plated through hole barrel to remain intact with board. Pins are used in high current applications, pins are made of brass material.

This story is related to the following:
Fasteners & Hardware

Search for suppliers of: Pins | Metal Pins



Leandrum Eco Washer allows easy drum removal.

Mon, 23 Jan 2017 15:19:45 -0500

Featuring very robust, lower cost option utilizing stainless steel tanks, drum and housing, premium electrical components,   unit is designed for easy maintenance access that will allow easy drum removal with no crane required. With part production rate of 12 CU FT/Hour @ 2PRM design drum speed, machine offers full immersion cleaning, eliminating any need for pumps and nozzles. Machine comes in small footprint of 5.3ft. wide x 11ft. deep x 5.3ft. height.

This story is related to the following:
Fasteners & Hardware

Search for suppliers of: Automotive Washers | Carbon Steel Washers | Special Size Washers



E3 Vise Action Compression Latch meets NEMA 4 and IP65 standards.

Mon, 16 Jan 2017 15:04:55 -0500

Delivering robust and vibration-resistant fastening, E3 Vise Action Compression Latch fits into enclosures with interior space constraints. Featuring variety of grip lengths, unit provides secure latching for high vibration environments. Suitable for rugged and outdoor applications, product is available with pre-installed cam options which minimizes installation time.

This story is related to the following:
Fasteners & Hardware

Search for suppliers of: Latches | Compression Latches



Drywall Screw Setter features spin-free screw setter sleeve.

Fri, 13 Jan 2017 14:03:41 -0500

Driving screws perfectly in drywall, particle board and plywood, Drywall Screw Setter works as dimpler and magnetic holder. Screw Setter features spin-free screw setter sleeve, fastener retention and 1/4 in. quick change shank. Package includes one 2-in-1 combination magnetic bit holder and screw setter with five 1 in. driver bits.

This story is related to the following:
Fasteners & Hardware
Portable Tools

Search for suppliers of: Bolt, Lag, Nut & Screw Runners or Setters | Set Screws



R4-05 Micro Rotary Latch offers concealed latching.

Fri, 13 Jan 2017 12:13:42 -0500

Made of corrosion-resistant steel, R4-05 Micro Rotary Latch provides increased security with greater toughness. Ideally used in applications with space constraints like industrial machinery industries, R4-05 latches minimize protrusion being compact and symmetrical. Latches permit remote actuation rotary systems to be integrated into applications and features bumper to resist vibrations. Latches are available in cable and hand actuation with single and two-stage latching.

This story is related to the following:
Fasteners & Hardware
Safety & Security Equipment

Search for suppliers of: Latches | Safety Latches | Rotary Latches



GN 612.3 Indexing Plungers feature matte black technopolymer plastic sleeve.

Wed, 11 Jan 2017 12:03:59 -0500

Offering comfortable finger grip, GN 612.3 Indexing Plungers come with 110°C heat resistant plastic ribbed sleeve. Used in retracting pins, unit’s lever arm can be rotated up to 180°. Designed with stainless steel housing, plunger pin and spring, plunger’s groove allows lever to be held in retracted and non-retracted positions.

This story is related to the following:
Fasteners & Hardware

Search for suppliers of: Plungers | Index Plungers



Cintecâ�(TM)s Anchor minimizes damage to buildings from seismic activity.

Fri, 30 Dec 2016 14:40:59 -0500

Ideal for protecting historic buildings in areas of high seismic activity, Dissipative Anchor is designed for use with cintec’s proven wall anchor system. Allowing small amounts of movement through sliding mechanism, unit avoids pull-out damage possibility at anchorage head. Consisting stainless steel anchor body encapsulated in fabric sock, product allows controlled and repairable drift for walls. Unit features built-in stops to restrict sliding motion.

This story is related to the following:
Fasteners & Hardware

Search for suppliers of: Masonry Anchors | Wall Anchors



H3-EM Swinghandle Reader meets HIPAA, HITECH and PCI DSS requirements.

Fri, 23 Dec 2016 14:35:57 -0500

Integrated with multi-class RFID, H3-EM Swinghandle Reader reads HID 125 kHz RFID credentials and 13.56 MHz iCLASS® smart card based credentials. Featuring integrated LED indicators for visual status of equipment access, unit offers single-hole panel preparation that is compatible with industry standard enclosures for OEM integration. With access control system connection, reader enables user to easily track and record access to electronic locks.

This story is related to the following:
Fasteners & Hardware

Search for suppliers of: Electronic Locks | OEM Locks | Safe Locks



optiSLITE Miniature Ball Screws delivers lower friction torque.

Thu, 22 Dec 2016 16:07:24 -0500

optiSLITE Miniature Ball Screws are suitable for linear axis stage applications such as atomic force microscopes, nanoscale machining and wafer dicing. Available in standard lengths and nut designs, ball screws feature shaft diameters down to 5 mm and pitch down to 1 mm. Offering dynamic delivery of linear motion at high standards of precision and longevity, units meet nanopostioning requirements with extreme reliability and repeatability of 1nm.

This story is related to the following:
Fasteners & Hardware
Machinery & Machining Tools

Search for suppliers of: Miniature Ball Screws | Torque Screws