Last Build Date: Fri, 28 Oct 2016 09:01:27 -0400
Mon, 24 Oct 2016 08:32:15 -0400Using a hollow-fiber membrane, Nitrogen generators produce 99.9% pure dry nitrogen. Product comes in 3 sizes and 4 flow ranges for making in-house nitrogen generators. Suitable for laboratory storage or process applications using desiccators and gloveboxes, generators can deliver up to 400 SCFH. Operates without electricity and users can utilize generators’ low-pressure alarm for trouble-shooting and maintenance.
Mon, 24 Oct 2016 08:32:15 -0400Solution generated by CCT-Caddy and CCT 3.0 Fill Station is certified to Green Seal's standard for Cleaning Products for Industrial and Institutional Use. CCT Caddy, consisting of touch-free mobile cleaning unit that generates aqueous ozone cleaning solution, allows for on-demand cleaning where needed. Wall mounted and connected to water source, Fill Station generates aqueous ozone cleaning solution which can be used to fill other cleaning equipment such as autoscrubbers or carpet...
Fri, 21 Oct 2016 09:46:16 -0400Suitable for pipe diameters from 6–96 in., HotPurge® Inflatable Pipe Purging System is designed for heat treated chrome and high strength stainless steel pipe joints where temperatures might be as high as 1,400°F for many hours. System includes PurgeGate® device to prevent over inflation of, and damage to inflatable dams. HotPurge can be used repeatedly for weld purging and will keep oxygen levels below 100 ppm throughout welding cycle, ensuring oxide and coke free welds.
Thu, 20 Oct 2016 08:32:21 -0400Available in ½–1 in. sizes with screwed, SW, and flanged connections, FT62 range of ASME 600 float and thermostatic steam traps suit Oil & Gas and Specialty Chemical industries requiring accelerated and efficient condensate removal. Body material options are carbon steel (FTC62) and stainless steel (FTS62). Designed for maintainable drainage of small, high-pressure process applications, products also come standard with integral bi-metal air vent and strainer.
Mon, 17 Oct 2016 08:32:15 -0400Designed for drying powders in process industries, cosmetics, and food, Guedu® Vertical Dryer stirs powder under vacuum, cutting drying time and total cycle time compared to tray dryers. Mechanical mixing during drying optimizes product homogeneity. At end of cycle, product comes out evenly dried, with residual moistures below 0.1% where required.
Fri, 14 Oct 2016 08:32:15 -0400Designed for chilling or heating biological samples from -10 to 100°C, EchoTherm™ Model IC22 can run 2 separate or identical temperatures and 2 different sample blocks simultaneously. Unit has built-in data logger, 30-day countdown timer with alarm, and RS232 interface, making it suitable for use with robotic systems. IC22 can be used with standard accessory sample blocks for 0.5, 1.5, and 2.0 mL centrifuge tubes, PCR tubes and plates, 96- and 384-well assay plates, vials, and most test...
Fri, 07 Oct 2016 08:32:21 -0400Exhibiting increased tensile strength, tensile modulus, compressive modulus, and greatly improved elongation properties, TECATRON PPS stock shapes are chemical resistant and suitable for food processing and energy industries. Manufactured using FDA compliant resins, characteristics include tensile strength 13,700 psi; tensile modulus 836,700 psi; flexural strength 20,400 psi; flexural modulus 631,100 psi; compression strength 19,000 psi; and compression modulus 400,000 psi.
Wed, 05 Oct 2016 08:36:36 -0400Featuring fully decentralized design with compressed air ports at side and vacuum port underneath, piSTAMP Vacuum Generator fits in generic suction cup holders found in standard automotive press shop tooling systems. Ports for compressed air and vacuum are supported by quick-fit push-in connectors of varying diameter. Made of PA66 material, piSTAMP has integrated release mechanism and utilizes COAX® technology, ensuring low air consumption, optimized suction capacity, and fast evacuation.
Tue, 04 Oct 2016 08:32:13 -0400Made in lightweight PA66 material, piINLINE®plus Generators are supplied with 1 or 2 MICRO COAX® cartridges for small or large suction cups, respectively. Integrated automatic release function is available in 2 designs: Atmospheric Quick Release, which requires no extra compressed air hose, and Exhaust Block Release. Designed with ports for compressed air and vacuum in-line, supported by quick-fit push-in connectors, generators are mounted directly onto hose, close to point of suction.
Tue, 04 Oct 2016 08:32:13 -0400Constructed of 316 SS and finished to USDA, FDA, or pharmaceutical requirements, Model HIM-124-S316 provides low to high shear as required for high-speed blending and/or homogenizing of dry solids, agglomerates, slurries, or pastes. Homogeneous blends can be achieved in as little as 20 seconds residence time at throughput rates to 200 ft³/h. With standard drive consisting of multiple V belt and sheave arrangement, blender provides agitator speeds from 100–2,500 rpm.
Mon, 03 Oct 2016 09:01:35 -0400Able to handle institutional waste, packaging products, and corrugated materials, CP-2102 comes with two dual 5” cylinders. Minimizing costs and employee labor, compactor includes an optional wet pack feature that reduces foul-smelling discharge. Presenting a security chute system, unit meets or exceeds ANSI and OSHA specifications for safety. Along with large, clear top opening of 42” x 57.5”, and a 40 Gallon Oil Reservoir, CP-2102 runs on 10 HP motor with Tri-Volt 3 PH.
Mon, 03 Oct 2016 09:01:35 -0400Offered in sizes from ½–3 in. and capacities up to 31,000 lb/hr, fully automatic IBV series are fabricated and manufactured to operate safely and comply with industry regulations. Each high pressure inverted bucket steam trap is designed with minimal fraction from mechanism movement, and valve closure, without any steam loss, is immediate. Standard offering includes carbon steel and alloy steel body and cover, with socket weld and flanged, to ASME 900.
Thu, 22 Sep 2016 08:32:16 -0400Offering 36 x 36 x 60 in. workspace, No. 936 features 24 KW installed in Nichrome wire heating elements and 1,500 cfm, 1 ½ HP recirculating blower that provides horizontal airflow to workload. Construction includes 5 in. insulated walls, top-mounted heat chamber, Type 304 2B finish stainless steel interior, and stainless steel exterior with No. 4 brushed finish. For accelerated cooling, 325 cfm powered forced exhauster as well as motorized dampers on intake and exhaust are standard.
Wed, 21 Sep 2016 08:32:13 -0400When poured down drains, EverPrime® prevents pipes from drying out for months and is not impacted by cold, hot, or dry weather. Biodegradable product has freeze point of -22°F and is suitable for use in floor and shower drains, HVAC, condensate drains, plumbing fixtures, and drains with broken trap primers. Typical applications include educational facilities, hospitals, stadiums, vacated buildings, vacation rentals, RVs, and boats.
Wed, 21 Sep 2016 08:32:13 -0400By cleaning both sides of filters in place along with inside of exhaust plenum, Accurex GWAE Auto Scrubber Hood System eliminates need for daily removal and cleaning. Product features 2 in. gravity drain that captures grease from pitched grease trough, single control panel that controls multiple hood sections or duct sumps, and tool-less access panels that facilitate maintenance and inspection. System is suited for heavy grease producing appliances such as char broilers, fryers, and griddles....
Wed, 21 Sep 2016 08:32:13 -0400Custom-tailored to process, MV MultiTrap® Duplex Carts include two 16 in. vacuum inlet traps that accommodate various filter cartridges to meet high-flow vacuum deposition process requirements. Design provides up to 160 ft² of filtration surface area and 60 g/ft² particle retention and facilitates access to process components. Carts can be equipped with internally cooled baffles with up to 30 ft² cooling surface area and supplied with NW-40 to ISO-160 ports.
Mon, 19 Sep 2016 08:32:15 -0400Designed to address needs of refinery and petrochemical industries, Zimpro® Electro-oxidation System uses electrically conductive boron doped diamond electrodes, enabling efficient oxidation of organic and inorganic compounds that are dissolved in spent caustic. System’s flexible, modular design is capable of treating highly contaminated spent caustic streams. Treatment using Zimpro electro-oxidation produces effluent that is amenable to traditional wastewater treatment processes.
Wed, 14 Sep 2016 08:32:16 -0400MRI-compatible LCP monofilament overcomes limitation of other vascular visualization procedures while removing radiation exposure from procedure. Along with LCP (liquid crystal polymer), or thermoplastic resin, properties, this Class VI-approved and autoclavable product provides optimized torque response, pushability, and kink resistance. Tensile strength provides safe braiding option for medical device manufactures, and minimal fraying occurs during braiding process.
Wed, 14 Sep 2016 08:32:15 -0400Able to optimize heat stability and reduce mixing time necessary to completely blend polymer, Ceranovus™ Polyethylene and Polypropylene Waxes are valuable additives in both SBS (styrene-butadiene-styrene) and APP (atactic polypropylene) modified bitumen roofing systems. Products decrease viscosities at process temperature and minimize bleeding of higher oil formulations through oil scavenging. Synthesized from 100% recycled materials, modifiers are available in pastilles or granules.
Mon, 29 Aug 2016 08:32:17 -0400Suited for PWB connectors and board level protection, thixotropic SpeedMask® 9-20479-B-Rev-A cures in seconds with light. This resin, designed for protection of electronic components and assemblies, provides protection from reflow or wave soldering operations and shields keep-out areas during conformal coating applications. Solvent- and silicone-free, this blue, peelable maskant offers facilitated removal and eliminates concern of ionic contamination or residual silicone.