used production plants

Vehicle spare parts are often forged

2011-11-23T00:57:44.096-08:00

Expensive "bargain"The shops in Russia are preparing the ContiTech Manager Ulrich Huthcurrently not very much fun. The supplier is facing a wave of fakeAsian Conti-drive belts for car engines. "The design of packaging andthe belt is completely copied," says Huth.The automotive supplier Continental is not alone with this problem.Worldwide, according to industry estimates, is approximately everytenth car spare parts from illegal sources - many of them in lowquality. With modern technology, want to fight back against theoriginal manufacturers product pirates.Particularly affected are the world leader sees Bosch. "The strongerthe brand is, the more fake. Counterfeiting is becoming a problem,"says Peter Tyroller member of the management. Similarly, theassessment is the Stuttgart supplier Mahle. "There are an increasingnumber of counterfeit products from Western manufacturers and thiswill continue to grow," says the charge of the retail business managerFranz ArndThere is hardly a car part that is not copied. During the trade fairAutomechanika in Frankfurt, the main customs office in Darmstadt aftersaying his spokeswoman Kirsten Jung 500 exhibitors from non-EUcountries, and controlled in 43 of them fakes confiscated. Thespectrum ranges from manufactured without a license Snoopy floor matswith motifs of brake pads to complete steering gears.Counterfeiting in GermanyBe forged parts according to expert assessment in the world, not onlyin this often-maligned China. Plagiarism will be sold according to theassessment of the Conti-developer Norbert Manger mostly free,non-certified repair shops, now also increasingly on the Germanmarket. But that apparent bargains can car owners as well as theworkshop to be costly. "Destroy one of these fake belts, he may causesuch great damage to the engine, that at least the cylinder head mustbe replaced," said Conti-man Huth. In Germany would be expected inthis case, with repair costs of about € 1000. The costs will dependnot only the car driver or workshop. Also, the original partmanufacturer may be prosecuted for forgery, which carry their logo andtheir logo, says Ulrich Jürgensen from German Business Action Groupagainst Product and Trademark Counterfeiting (APM), a lobbyingassociation for German industry.Fakes bring the original manufacturer not only to their sales, but canalso destroy the image of a brand. This can have serious consequencesfor the future of a company. "Innovation is not rewarded more if theyutilize a forger makes," says APM lawyer Juergensen.Manufacturers rely on safety technologyTo put a stop to piracy, the manufacturers are focusing on securitytechnology. "This is a huge growing market," says Martin Reinhardt ofTesa SCRIBOS. The daughter Tesa 2003 has a digital hologram, theHolospot brought to market. He ran a sort of unique serial number thatis glued to the computer generated and provided with up to four levelsof encryption on a product. Depending on the equipment, the price ofone cent Holospot digit range. "So that is profitable for massproducts," says Martin. For example, using the technique comes at thesupplier Siemens VDO. "We are already using this identification systemfor the most copied products in our fuel systems and engine componentsprogram," says the company.Automechanika fairs such as make it easier for original equipmentmanufacturers to detect counterfeits of their products, especiallythose responsible aware of exhibitors and visitors to this issue."Counterfeit goods can be confiscated by the authorities," said MarcusKuehne-design at the German Patent and Trademark Office. For companiesto enforce their claims, however, they must register their rights. "Itjust costs money and small companies have to always ask if this isworth it for them."[...]

Professional DJ headphones: DT 770 PRO

2011-09-02T06:45:02.924-07:00

(image)
(image)

Headphone News, 08/31/2011 at 20:24 clock

Beyerdynamic DT 770 PRO

The brand manufacturer of audio equipment and headphones Beyerdynamic has been able to make in recent decades a nasty reputation in the industry. One of the many reasons for this include the high quality materials, which are installed in each device. This will give the different models for long life and a very high degree of resilience to external influences and also to premature wear. The closed headphone DT 770 PRO is also a very high quality product from a wide range of headphones with the Beyerdynamic emblem. The device is primarily intended for professional users who want to make using this headset as DJs or producers in the studio or on stage, of course, also for the entertainment of their audience. The exterior design is rather simple, yet very appealing. The combination of black and gray always looks very elegant and the structure of the entire construction can be just a glimpse of the professional use. The extremely large ear cups provide in combination with the very generous cushions for a truly high level of comfort. For this reason, one can certainly wear the headphones for several hours without getting pressure sores or pain. Furthermore, supposedly unwanted background noise to be screened nearly one hundred percent. This allows the DJ to work with these headphones from Beyerdynamic alone and can concentrate fully on his work.

The headband is made of sprung steel itself is also very robust and gives the DJ-gadget a long life insurance covering risk. The headband can be adjusted to any head and set the cups on each side individually. The cable is connected on one side of the device and can be removed if necessary. In connection with the DT model, the closed bag can be transported very comfortably and safely and prevent damage such as broken cable. There are also the manufacturer Beyerdynamic replaceable ear pads and sanitary protective coverings for the ears. These can be used for transportation or for use by multiple persons. The sound of the headphones is in a class by himself and convinced both live performances and productions in a professional studio. The intense sound delivers rich bass sound, and includes many details.

(image)

Bauma 2010 Record number of exhibitors

2010-12-15T05:28:08.462-08:00

(image)
(image)

(image)

Japan sets, mining equipment demand

2010-12-15T05:26:01.720-08:00

(image)
(image)

EMFIS.COM - Tokyo 21:04:08 (www.emfis.com) In Japan, the Exchange may now properly gain. The Nikkei climbed 1.5 percent at the moment and moves so that after a long time again in the direction of the mark of 14,000 points. The export values in the face of a weakening yen breathe on. He stands with 103.76 to one U.S. dollar. As in other markets, so lay also in the Japanese stock market, the bank values. Since the losses from Citigroup turned out but not as severe as expected, market participants see a glimmer of hope on the horizon of the financial crisis. And long to courageously. The Sumitomo Mitsui Financial Group may increase by 2.3 percent and Mitsubishi UFJ by 2.6 percent.
The focus was now to all firms in the construction and mining equipment. The increasing demand of mining companies in China and Russia, and the related positive outlook had to leave last Friday off at the U.S. stock market, the stock of Caterpillar by 13 percent. In the wake of today the values of Komatsu go up by 6.4 percent, Hitachi Construction Machinery of 5 percent and the Kubota Corp. by almost 9 percent.
The NEC Corporation by a whopping 7.3 percent after it will probably reach the profit sector of mining equipment to record levels.

(image)

VW wants to compete in Southeast Asia

2010-08-11T03:43:02.645-07:00

(image)
(image)

VW VW Amarok could help the Wolfsburg to win the Southeast Asian market.
The pick-up VW Amarok is primarily developed for the South African market has been.
The rolling in the autumn to Europe but also has commercial vehicle sales opportunities in the Southeast Asian market (Asean), as. Bernd Osterloh, head of VW Works Council to the Financial Times Germany said. " "Partly because of poor road conditions, pick-ups in countries like Thailand and Vietnam are extremely popular."

Similar to India or China is also the Southeast Asian market is a growth market. In 2009 in Thailand, Vietnam and Malaysia, 1.8 million vehicles were sold. The market share of Wolfsburg, however, is currently at only 0.2 percent. Toyota's main competitors - which traditionally is in the pick-up business very much - has a share of 33 percent. One reason for the poor preparation of the VW to the Asean markets are high import duties. Our own work is not yet available, only a partial assembly in Indonesia. "From 200 000 units per year would be worth even one plant in Southeast Asia," Osterloh said in reference to the Amarok. "Vietnam as the location I would prefer." Concrete plans for the construction of a new production there has not yet.

A first step to conquer the Asean markets, has VW done with the participation in the small car specialist Suzuki. The Japanese manufacturer is building a plant in Thailand, could also benefit from the VW. (image)

excavation production

2010-08-05T02:44:00.122-07:00

(image)
(image)

1.2 Excavation Work Categories
In the context of excavation work, safety and shoring are only one
aspect. Excavation work in its entirety is anything involving mechanical
movement of the earth’s surface. Categorically it can be broken
down by sequence of work, as in Fig. 1.1. There are four major categories;
surface work—cut and fill, then construct production work; below
surface work—cut, construct production work, then cover it up; mining
and tunneling—cut then restore; and agricultural—cut, plow, and
plant. A single project usually can originate in any one of these categories
and involve all of them. There are unique safety issues associated
with each category. This book focuses on excavation and safety
issues surrounding below surface work.
Below surface work is the category of excavation work that OSHA
Subpart P was written for. In 1926.650(a) OSHA states the scope and
application. This subpart applies to all open excavations made in the
earth’s surface. Excavations are defined to include trenches.
OSHA 1926.651 applies to general excavation safety; however, 9 of
12 citations apply to work that involves excavated holes or trenches.
Only three citations—Exposure to Vehicular Traffic, Exposure to Falling
Loads, and Warning Systems for Mobile Equipment—apply to general
excavation work. OSHA 1926.652 and all the remaining appendices
apply to worker protection from cave-in. The entire 29 CFR Part 1926
Safety and Health Regulations for Construction apply to all construction
operations; however, OSHA Subpart P is specific to when
excavation work causes there to be a hole in the ground.





From the handbook of excavation systems.(image)

Waste-Free Manufacturing Plant

2010-03-26T03:38:59.708-07:00

(image)
(image)

(image)
(image) Drawing from more than 30 years of manufacturing experience, John Davis gives you tools and techniques for eliminating anything that cannot be clearly established as value added. WFM is not a theory. It is a proven process, and one the author has successfully implemented. He shares with you from his own experiences in guiding manufacturers through this process. Davis fully details the journey of a factory that moved from mass to waste-free manufacturing in a matter of 24 months. This factory was nationally recognized by wall street analysts as an effective manufacturing model. You get to sit in on their meetings and learn from their triumphs and failures. (image)

power plants for sale

2010-03-25T12:36:53.156-07:00

(image)
(image)

There are used and unused power plants for sale. If you are interested into purchasing a power plant please contact power plants for sale.(image)

used cement plants for sale

2010-03-25T12:37:33.664-07:00

(image)
(image)

There are used cement plants for sale. If you would like to establish your own cement plant, please visit used cement plants for sale.(image)

Comments (0) - Read and Add your own Comments