Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

FL ka-t, 240sx fuel

Sun, 21 Mar 2010 17:48:34 GMT

ok here is a list of things for grabs 2k miles s14 ka24de-t motor fully built last dyno @ 585hp - $2500 pm me for all the info on motor 2k miles used ka24de act unsprung 6 puck clutch with pressure plate - $260 s14 ka24de powder coated...

wtb s13 tension rods, oil catch can, painless panel

Sun, 21 Mar 2010 17:40:06 GMT

wtb cheap greddy catch can, s13 aftermarket tension rods, painless panel with 6 built in fuses preferably used and cheap. let me know what you have. Image: http://www.bearsperformanceproducts.com/images/50302painless.jpg

TX Clean S13.5 with many mods Built SR20det!

Sun, 21 Mar 2010 17:07:31 GMT

I have a Highly Modified 1990 Nissan 240sx. Car is a 5-speed and has a clean title. Perfect car for drifitng. This is the lightest hatchback model, no power options or sunroof!!!! 300+ Horsepower capable with bigger injectors, very fast. Also has...

CA Set of MB Battles-BRONZE- 17x9 +15/114.3

Sun, 21 Mar 2010 16:56:45 GMT

pics coming later after i give 'em a wash. they've got less than 4k miles on em. Other than a scratch on a spoke from a stupid tire tech during the mount/balance these are minty :) asking $600 obo picked up comes with chrome valve stems.

CA 180sx Type-X Front bumper, Side Skirts, and Rear Valences

Sun, 21 Mar 2010 16:43:30 GMT

Hi there, Check out what I have for sale here, *1. Complete JDM OEM Type-X front bumper+Type-X complete Side Skirts set+Type-X Rear valences *The whole set includes; - Complete Type-X Front bumper (Front bumper, bumper lights, turn...

s15 front lip

Sun, 21 Mar 2010 16:36:01 GMT

hey folks,i'm looking for an s15 carbon fiber front lip.since i'm hardly online please call me at 917-807-0060.my name is Richard.thanx in advance.

wtb: parts for 90 240sx automatic

Sun, 21 Mar 2010 16:15:17 GMT

Hey everyone I'm back again with another 240sx. I need the following parts: drivers side taillight wiring piece where the bulbs go for a coupe an automatic transmission revolution sensor, it the other sensor on the opposite side from the speed...

Power Steering Pulley Washer - Destroyed!

Sun, 21 Mar 2010 15:54:49 GMT

Hello members, I just recently bought a "Silforty" SR20 93 HB (my first 240sx). While driving home from the sellers house, I notice that the steering was pretty stiff. When I got home, I checked the PS resevoir and it was pretty empty and noticed...

Is this a tune problem?

Sun, 21 Mar 2010 15:22:35 GMT

I just got my ECU back from Enthalpy. Installed my 550s and the MAF but the car doesn't want to start. -Got fuel, you can hear the injectors -Got spark, buddy flew back a few feet -Test the MAF voltages and everything is good Is this a...

OK Rb20/sr20/silvia/s13 parts! Big for sale thread!

Sun, 21 Mar 2010 15:22:34 GMT

*S13 manaul swap* Around 140k miles comes with pedal, cylinder, slave cylinder, lines, and driveshaft. $125.00 PIctures soon! *3 4x114 wheels* rota knock offs??? No idea. Only got 3 of them, they look to be in good condition, and...

CA Tein Super Drift Sideway Master coilovers

Sun, 21 Mar 2010 15:19:56 GMT

selling Tein Super Drift Sideway Master coilovers brand new condition was only on my car for 2 weeks and sold the car to my brother decided to sell them separately asking for 1200 cash adjusting tool included never been used, never had those on...

WTB: Cusco/Safety 21 Driverside Door Bar

Sun, 21 Mar 2010 15:09:43 GMT

As the title says, looking for a legal door bar that will bolt on to an s13 hatch cusco 6 point cage. Need it asap, and shipping will be to 30253. Thanks in advance. Text 678 763 2290 or PM me on here, but text will be easiest to get a hold of...

CA sr down pipe. elbow and z32 brakes

Sun, 21 Mar 2010 15:06:04 GMT

I have a 3"inch sr20det down pipe made by Edge and a 3"inch turbo elbow made by edge. The fitment Is awesome. fits perfectly!! Asking $140 for the combo!! Also have z32 aluminum brakes with slotted rotors drilled for 4 lug and Stainless steel...

SC S14 and S14 SR20 parts

Sun, 21 Mar 2010 14:20:02 GMT

Need to make some room and make a little money to get my motor build finished up. I'm willing to ship if you pay for it. All prices are OBO. S14 sr20 block, ran fine when I pulled it apart, has brand new dip stick tube and most of the oil galley...

Sr = stooopid! Boosts when It feels like It

Sun, 21 Mar 2010 13:49:15 GMT

My friend has a sr20det black top s13. Side mount,wb fuel pump. 3"inch exhaust and a boost controller. He wanted me to turn up the boost so I turned It up to 12. The guy doesn't know much about cars at all. or how to even drive a turbo car...

WTB sr20 head gasket- NOT STOCK!

Sun, 21 Mar 2010 13:47:14 GMT

Just Blew a stock headgasket, so none of those please.

Injector seals

Sun, 21 Mar 2010 12:34:53 GMT

So my number 4 injector seal is leaking and i went to advance auto parts to get a new seal. I told the guy 1990 240sx. I ordered the seal (They have to ship it over). I looked at my receipt later that night (I know I know, I should have looked at it...

egi/eccs relay wiring

Sun, 21 Mar 2010 10:26:32 GMT

i picked up a 240 with sr20 swap tht was running at the time the ecu main power was connected directly to the battery i cut the wire out and apparently theres no egi/eccs relays at all does anyone kno where these relays go and what wires are...

CA WTB: s13 or a s14 under 2k

Sun, 21 Mar 2010 10:25:09 GMT

I dont care what it looks like or what color it is all i care is that it runs and its a mt.

squeaky noise from the rear

Sun, 21 Mar 2010 09:53:54 GMT

i just had my alignment done a couple months ago and ever since then my cars been squeaking in the most annoying way every time the car bounces. i got megan rear lower toe arms, megan rear upper and lower control arms, megan bottum sway bar, megan...

CA |fs*| { dmax roof wing / spoiler } =^_^*=

Sun, 21 Mar 2010 09:38:52 GMT

S14 Dmax Style Roof Wing * awesome fitment * no gaps or anything negative * made out of layered frp, pretty tough! * new, never mounted, just test fitted I ended up buying one for my girlfriends car and mine to match, but plans changed...

CA CLEAN z32 calipers front

Sun, 21 Mar 2010 09:22:21 GMT

I have a pair of beautiful 300zx 26mm front calipers...going to rebuild them upon purchase with OEM rebuild kit...comes with everything u need to bolt them in minus pads....I also offer rebuild/refurbish jobs for $35 u buy rebuild kit...asking price...

i think its pretty useful...

Sun, 21 Mar 2010 09:22:18 GMT

so maybe you went all out on your jdm rhd conversion and now your fuse box is soo jdm, you dont know what it says anymore lol :keke: yeah well, that happened to me lol :rant: luckily i found this: (I just found it, so I havent boughten one...

WTB S14 Leather seats in WI area

Sun, 21 Mar 2010 09:18:33 GMT

...in off-white color. It kinda looks biege or light grey. OEM in the s14 240sx LE. No cuts or tears. I know the shipping cost would be crazy so I'd like to buy from someone in WI. I have misc SR parts/cash. Give me a reasonable price. Pic please....

AL FT Desmond Regamasters 5x114.3 18x9.5 +18

Sun, 21 Mar 2010 08:46:41 GMT

desmond regamaster for sale wheels there 18x9.5 +18 very aggresive fitment also willing to trade for other 18x9 or 18x8 rims let me know 2 rims are in good condition other 2 have very minor curb rash located in canada willing to ship Image:...

S13 welded diff

Sun, 21 Mar 2010 08:42:45 GMT

I am looking for a welded diff for my S13

CA For Trade: MB Battles 17x9.5 +15 (5x114.3)

Sun, 21 Mar 2010 08:38:03 GMT

I got these rims for a car meet and photoshoot. Now that its done, I'm looking for something different. I had these rims for less than 3 days, traded with another member here. These also come with tires 215/40/17 and 224/45/17 I'm very...

CA D1 grand prix ps2

Sun, 21 Mar 2010 08:26:00 GMT

have d1 grand prix for ps2. 35$$$ no scratches. game and manual txt or call 323 649 3476 local pick up only no shipping or trade me for armored core: for answers http://www.geomatrix360.com.br/loja/images/ps2_d1granprix.JPG

Ctrphotography coverage of XDC at Irwindale

Sun, 21 Mar 2010 08:16:41 GMT

I post it a few pictures of XDC at my website ctrphotography.net Congratulations to David Briggs from Ontario Canada who won the Event Local Talent such as Quac Ly got Second and Jeff Jones third