Subscribe: AVS Forum - DIY Speakers and Subs
Added By: Feedage Forager Feedage Grade A rated
Language: English
bass  bose speakers  cabin speakers  cabinet  closed cabin  driver  drivers  htm  media cabinet  scala  speakers subs  speakers  subs  vnf 
Rate this Feed
Rate this feedRate this feedRate this feedRate this feedRate this feed
Rate this feed 1 starRate this feed 2 starRate this feed 3 starRate this feed 4 starRate this feed 5 star

Comments (0)

Feed Details and Statistics Feed Statistics
Preview: AVS Forum - DIY Speakers and Subs

AVS Forum | Home Theater Discussions And Reviews - DIY Speakers and Subs

This area is for people that like to build your own speakers and subs. Share ideas and get the most out of what you do.

Last Build Date: Tue, 20 Feb 2018 23:46:17 GMT


what are my options: subwoofer to be placed in media cabinet ?

Tue, 20 Feb 2018 15:57:45 GMT

So I have a media cabinet/tv console where I have to put a subwoofer inside, for home theater application and TV. Constraint: The cabinet is 12...

Best 12" for ported sub?

Tue, 20 Feb 2018 11:28:01 GMT

Hello, I'd like to put a beefy 12" driver in my 4 cubic ft. box that has dual 3" ports that are 20" long each. Any suggestions on a good powerful 12"...

REW In Montgomery Alabama

Tue, 20 Feb 2018 01:16:02 GMT

Is there anyone who knows how to run REW and do a calibration for me. I am near Montgomery Al. I have a umk-1 I think its called. I just don't know...

Advice requested about changing tweeter/drivers/xover in existing speakers

Mon, 19 Feb 2018 20:37:08 GMT

Are their gains to be made by replacing existing speaker drivers and tweeters with those with superior specs if you also change out the crossover or...

Volt 10's Ported for Budget 2-channel Full Range?

Mon, 19 Feb 2018 19:55:45 GMT

I'm helping some friends of mine decide on a simple 2-channel system for probably 50/50 TV(streaming)/music. Their budget is small (about $700...

HT 3.0 speaker upgrades Atmos 9.2.4 / Auro3D 13.2 HTM-8/6/12

Mon, 19 Feb 2018 17:56:41 GMT

Erich H , mtg90 , I'm in planning stage of HT 2.0 to 3.0. For non-ceiling speakers, mostly I'll be using the HTM line-up as shown below HT...

Where to buy 18" sub driver in Canada

Mon, 19 Feb 2018 05:23:33 GMT

So I am throwing around the idea of building a Marty for my HT. I thought I would find lots of selection online for different drivers but it seems...

used winISD first time - would you please check?

Sun, 18 Feb 2018 23:17:26 GMT

Hello, I read the winISD manual and tried to simulate the response with below specifications: Pioneer TS-W126M driver specs:...

Helps choosing DIYSG HTMs for my setup

Sun, 18 Feb 2018 23:15:30 GMT

Moved post to the dedicated HTM thread, as the question was specific to choosing between one of those kits. ...

HT18 VNF Sub(Riser?)

Sun, 18 Feb 2018 22:33:14 GMT

My "Two Towers" ~32cf 11.5Hz LLTs are treating me very well, but I have a 3rd SI HT18v2 that I'd like to use VNF. The standard sealed VNF is an...

Smallest possible box with largest LFE

Sun, 18 Feb 2018 19:28:51 GMT

I recently switch AVRs from a Marantz (with DEQ) to NAD with Dirac. The DEQ really pumps the bass. I need to run the subs at almost full gain to...

Odd Bass application need help

Sun, 18 Feb 2018 15:11:15 GMT

I have a little situation and I am wondering if I can fix it with some BASS. My wife rides horses and their arena is a fabric building. See the...

DIY bass cab - La Scala II

Sun, 18 Feb 2018 13:34:36 GMT

Currently I'm running a pair of Klipsch La Scala IIs, and a pair of Tuba HTLP's (=horn loaded subs). The La Scala IIs are bi-amped. I have some...

Bose Speakers

Sat, 17 Feb 2018 21:02:28 GMT

Due to the contagious DIY speaker disease I caught from all of you...I am selling my Bose speakers on craigslist. I know, I know, everyone on this...

Best wood to make small closed cabin speakers

Sat, 17 Feb 2018 17:41:33 GMT

Hi all, I'm new to the sub and was wondering what the best wood is to make closed cabin speakers? I always thought MDF is good to be used for...