Subscribe: 吖十的道理™:: The 10 Network ::
Added By: Feedage Forager Feedage Grade B rated
Language: English
ascii  bytes  code  control  frame header  frame  header  ieee  install  ipad ipad  ipad  iphone  layer  offset  source  ssh  vlan 
Rate this Feed
Rate this feedRate this feedRate this feedRate this feedRate this feed
Rate this feed 1 starRate this feed 2 starRate this feed 3 starRate this feed 4 starRate this feed 5 star

Comments (0)

Feed Details and Statistics Feed Statistics
Preview: 吖十的道理™:: The 10 Network ::

吖十的道理™:: The 10 Network ::

Last Build Date: Tue, 06 Mar 2018 10:21:14 +0000


WiFi versus Wired

Mon, 21 May 2012 17:08:00 +0000


How was the life before the Computer?

Sun, 13 May 2012 04:14:00 +0000


How to install Papago X5 into Android 2.x

Sun, 29 Apr 2012 13:53:00 +0000

(image) This could be an old installation method, but it’s still useful especially for those who still using Android 2.x. I’d just tested it on Gingerbread (2.3) today and it works without fails.

1.Firstly, download the following files into your PC :

2. Extract the PAPAGO X5 engines including the APK file & a folder NAVIsea.

3. Install the Malfreemaps into your PC, select “Papago X5 for Android” during installation.

4. Then, connect your device to USB & mount it as USB storage.


5. Copy the PAPAGO X5 engines ( .apk) & NAVIsea folder into your device under root folder.

6. Install the APK using APK Installer, don’t Open it yet.

7. Copy everything from your PC ( C:\Navi\Maps\MFM-PPG-110301C/ ) and paste it in the /root/NAVIsea/Malaysia folder.

8. Now you’re done and Papago X5 is ready to use.

Reminder : Enable your GPS to location navigation.


Alternative download site :


Map :

Do you post status everyday?

Sun, 29 Jan 2012 10:09:00 +0000


Animated Video Wallpaper for JB iphone

Fri, 16 Sep 2011 14:52:00 +0000


It’s no longer only Android phone enjoys the animated wallpaper & lockscreen on their phone! Now you can have one, if you have a jailbroken iphone.

  1. Start your Cydia, and go to “Manage”.
  2. Then select “Source” and add the following source :


  3. Upon completion of the source update, search for “vWallpaper2 for iOS4” and install it.


  4. Then,  your iphone will be respring by itself and vWallpaper is ready to use on your desktop.

Additional video wallpaper source :

The iPhone evolution

Sun, 04 Sep 2011 04:33:00 +0000

Are you an iPhone fan/supporter?


Source : The iPhone Evolution

Top 30 Cydia Tweeks and Apps!

Thu, 01 Sep 2011 04:39:00 +0000

height="345" src="" frameborder="0" width="560" allowfullscreen="allowfullscreen">

Nslookup works but ping cannot resolve domain name?!

Wed, 10 Aug 2011 13:41:00 +0000


Have you experience this? Able to resolve using nslookup but failed to resolve the DNS when perform ICMP ping or traceroute ?

Here’s the solution that you may try, disable the DNS Cache :

> net stop dnscache      or

> sc servername stop dnscache

How to completely remove contacts on your iPhone?

Thu, 28 Jul 2011 15:16:00 +0000

1. Go to “Settings” application on your iPhone.

2. Click on “Mail, Contacts, Calendars” option.

3. Add a new account & select “Microsoft Exchange”


4. Then key in your Gmail username & password. Use “” as its Server.


5. Toggle the “Contacts” sync and there will be a prompt to delete all contacts from your iphone.


6. Done.

Play Angry Birds on your PC!

Tue, 17 May 2011 04:17:00 +0000

Now, you no need to have iphone/ipad or android phone to play Angry Bird! All you need is a PC with Google Chrome installed!

Check it out!  (image) (image)

Open / Download the free Google Chrome

Download from Google Chrome Web Store and install.

Browse to and start playing!


The Complete iPhone 5 Rumor Roundup

Wed, 06 Apr 2011 02:35:00 +0000


Mac Comparisons within 10 years!!!

Mon, 28 Mar 2011 16:30:00 +0000


OSI Model : Layer 2 (DLC)

Sun, 27 Mar 2011 16:13:00 +0000

Further to last post on OSI model, let me continue with some information on it. There’re some key parameters that embedded in every layer in one traffic. Legend : DA=Destination Address SA=Source Address FCS=Frame Check Sequence based on Cyclic Redundancy Check (CRC) SP=Source Port DP=Destination Port Layer 2 frame header Overview Offset 0-5 and Offset 6-11 At layer 2 (Data Link Control Layer)  frame header, source & destination MAC address will be the key parameters ( as shown in the ASCII packet below ). It takes up 6 Bytes for each layer-2 DA & SA and start from offset 0000 in your sniffer’s pcap file. *( Note : Sniffer will start the capture from Layer-2 DA & SA range, and normally Preamble & 32-bit FCS/CRC will be left ) Offset 12-13 The following 2 Bytes are allocated for the Ethertype, in the example above shows it’s IP type ( 0x0800 ). More info in IEEE Ethertype. This 2 Bytes will indicate the following layer-3 IP header type. Beside the example here which is Ethernet Version 2 Frame, there’re also some other 802.3 type e.g. IEEE 802.3 LLC Frame, IEEE 802.3 SNAP Frame & Novell Netware 802.3 RAW Frame. Offset 15-17 If the 2 Bytes following the SA is greater than 05DC HEX ( 1500 Decimal ), the station will identified by Ethernet Version 2. Else, they’re assumed to be a length field. When the following 2 Bytes showing 802.3 length as 38 Decimal ( 26 HEX ) means the following Bytes will be LLC ( Logical Link Control ) header. This sub-layer is acts as an interface between MAC sublayer and the network layer. Both DSAP ( Destination Source Service Access Point ) & SSAP ( Source Service Access Point ) will be taking up 1 Bytes respectively. This is simply to be the pointer to a memory buffer in the receiving station & of the sending process. Some example will DSAP/SSAP=43, means the following header will be BPDU ( Bridge Protocol Data Unit ). HEX AA (DEC 170) values are usually employed for the DSAP and SSAP values. Netware uses a HEX 03 in the SNAP Control field and will use the 0x81-37 Ethernet Type value. Usually, the Organizational Code is coded as all 0s (0x00-00-00) and NetWare is no exception. Offset 17 is simply the Control Byte. Offset 15-17  The first 3 Bytes i.e. Offset 15-20 is the vendor code. Refers IANA assigned Ethernet-numbers. Offset 21-22 is the local code, that typically indicate the IEEE Ethertype. This is where the backwards compatibility with Version II Ethernet is implemented. VLAN (  Optional frame header ) 802.1q VLAN tagged frame, is an IEEE standard, uses an additional header in the frames that identifies the VLAN. The 4 Bytes of 802.1q VLAN tag after Layer-2 DA & SA, the Offset 12-15, but it’s optional. VLAN tag takes up 32 bits in the frame header. The first 16 bits, which located at Offset 12-15 which same with the EtherType/Size field in the untagged frame, is the Tag Protocol Identifier (TPID). The following 2 Bytes ( 16 bits ) is the Tag Control Identifies (TCI). Priority Code Point( (PCP) the 3-bit field which refers to the IEEE802.1p priority. This indicates the frame priority level, from value DEC 0 (Best Effort) to value DEC 7 (Highest). CFI, or known as Canonical Format Identifier, 1 bit field. CFI normally used to identify between Ethernet ( value 0 ) or Token Ring ( value 1 ). Another 12-bit field specifying the VLAN to which frame belongs. A value of 0 means that the frame does not belong to any VLAN. In the case of Q-in-Q ( IEEE802.1ad ), another additional 4 Bytes of VLAN tagging is needed in the frame header. The first 4 Bytes which next to SA will representing the S-TAG[...]

Comparisons : iPad2 & others

Sun, 06 Mar 2011 16:43:00 +0000

Between iPad & iPad 2 : Original Post: iPad 2: Still Ahead of The Competition?  iPad vs iPad 2 iPad 2 vs HP TouchPas vs Motorola Xoom vs BlackBerry PlayBook Other related post:  iPad vs. Xoom vs. iPad 2 Spec Comparison Chart [...]

Firefox getting slower and slower?

Mon, 14 Feb 2011 17:54:00 +0000

Here’re some tips to tune and tweak your Firefox when it getting slower and slower ( or upon installation ) :

Modify the firefox config file

It’s easy to modify, just type “about:config” in your firefox browser, then search for the following parameters and change the value ( just like how you change your registry ) :

  • network.http.pipeliningset the value from false to true.
  • network.http.pipelining.maxrequests, change the value from default 4 to a higher value i.e. 8
  • network.http.proxy.pipelining, set the value from false to true.
  • browser.sessionstore.interval, change the value from 10000 (10 secs) to 120000 (2 minutes) to increase the firefox backup the session restore point interval.
  • Add the following parameter ( New->Integer ) and set the value to 0, nglayout.initialpaint.delay.

Securing yourself from a world of hackers

Wed, 09 Feb 2011 14:33:00 +0000


*Above = Copy Pasted from other’s post.

Also check out my earlier post Good Password Practices


Wed, 19 Jan 2011 04:43:00 +0000

Source From :

ASCII stands for American Standard Code for Information Interchange. Computers can only understand numbers, so an ASCII code is the numerical representation of a character such as 'a' or '@' or an action of some sort. ASCII was developed a long time ago and now the non-printing characters are rarely used for their original purpose. Below is the ASCII character table and this includes descriptions of the first 32 non-printing characters. ASCII was actually designed for use with teletypes and so the descriptions are somewhat obscure. If someone says they want your CV however in ASCII format, all this means is they want 'plain' text with no formatting such as tabs, bold or underscoring - the raw format that any computer can understand. This is usually so they can easily import the file into their own applications without issues. Notepad.exe creates ASCII text, or in MS Word you can save a file as 'text only'



Slow SSH connection in Ubuntu

Tue, 18 Jan 2011 02:49:00 +0000

There is always a problem with Ubuntu’s i.e. very slow SSH connection. For some reasons, there’re some options are being enabled by default and causing either the incoming or outgoing SSH connection very slow or hanged in a range from 15 to 60 seconds.

There’re two major contributors which I know of, than can causing the abovementioned problem.

[1] GSSAPIAuthentication

GSSAPI is a ITEF standard for doing strong encrypted authentication in network based applications. OPENssh uses this API and the underlying kerberos 5 code to provide a alternative means of authentication other than ssh_keys.

For some reasons, this feature is enabled by default since Ubuntu Fiesty, you can disable them globally affecting all users in the /etc/ssh/ssh_config

# SendEnv LANG LC_*
# HashKnownHosts yes
# GSSAPIAuthentication yes
# GSSAPIDelegateCredentials no

[2] Slow or Broken DNS Lookup

Everytime when you log into the OpenSSH server, it would actually perform a reverse-lookup on your IP address. If the DNS lookup timed out, then you’ll having big time of delaying as typically OpenSSH will perform 3 times trying.

All you need to do is add the following line in /etc/ssh/ssh_config

sudo echo "UseDNS no" >> /etc/ssh/sshd_config

Remember to restart the ssh services upon change.

How to use full screen mode in Virtual Box for Linux OS?

Wed, 29 Dec 2010 14:58:00 +0000

First thing, get your Linux OS install in Virtual Box as usual. Am going to use Ubuntu/Debian as example here.

Then, boot up the OS and open the Terminal window :

1. Login using Superuser using

    sudo su

2. Update the aptitude source

    apt-get update

3. Install the packages required :

    a. apt-get install build-essential

    b. apt-get install linux-headers-generic

Once completed, click on the VBox “Devices” menu and “Install Guest Additions”.


Then, go back to the Terminal window :

4. Make a new mount folder,

   mkdir /mnt/vbox

5. Mount the Guest Additions to the newly created folder,

   mount /dev/scd0 /mnt/vbox

6. Install the Guest Additions, depends on either you’re using x86 or 64bit workstation,

cd /mnt/vbox 



7. Reboot and you shall able use full screen as you like.

Another Cool iPad Apps!!

Mon, 13 Dec 2010 17:16:00 +0000


Now, you can extend your desktop to your iPad/iPhone!! Just like, you’re extending them to projector, TV etc.



Check this out….it works!



LogMeIn Ignition

This apps, allows you to remote control your desktop, just like well known VNC, teamviewer! Another best part is, they works over NAT from different networks without the needs to configure the proxy, port forwards etc. Now, you can switch on your desktop/laptop and remote control them using your iPad!




Some must have cool iPad apps!

Sun, 12 Dec 2010 15:23:00 +0000

Here’re some cool iPad apps, that you must have one in your dock…

Weather+ HD for iPad 



One of the coolest personal social media that allows you to read news, photos and updates sharing on the Facebook and Twitter. MUST TRY!


Friendly for Facebook



Pulse News Reader

Allow you to read your RSS feeder and link to your Google reader!


土豆网for ipad


How to Disable Autorun 2 for XP

Sat, 13 Nov 2010 17:41:00 +0000

Last Post : How to Disable Autorun, here’s the updated one.

Create a NoAutorun.reg by adding the following keys using Notepad and execute it to import into your registry:

To disable to AutoRun for all Drives



To disable & block the execution of Autorun.inf

[HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\IniFileMapping\Autorun.inf]

To remove the cache of all mounted drives